Search Results (40)

Background and Objectives: Screening for type 2 diabetes mellitus (DM2) aims to identify asymptomatic individuals who may be at a higher risk, allowing proactive interventions. The objective of this study was to predict the incidence of DM2 and prediabetes in the Saudi population over the next five years. Materials and Methods: The study was conducted in the Aseer region through August 2023 using a cross-sectional survey for data collection. A multistage stratified random sampling technique was adopted, and data were collected through face-to-face interviews using the validated Arabic version of the Australian Type 2 Diabetes Risk Assessment Tool (AUSDRISK). Results: In total, 652 individuals were included in the study. Their mean age was 32.0 ± 12.0 years; 53.8% were male, 89.6% were from urban areas, and 55.8% were single. There were statistically significant differences between males and females in AUSDRISK items, including age, history of high blood glucose, use of medications for high blood pressure, smoking, physical activity, and measurements of waist circumference (p < 0.05). Based on AUSDRISK scores, 46.2% of the included participants were predicted to develop impaired glucose tolerance within the coming five years (65.8% among females vs. 23.6%), and 21.9% were predicted to develop DM2 (35.6% among males vs. 6.0% among females); this difference was statistically significant (p = 0.0001). Conclusions: Urgent public health action is required to prevent the increasing epidemic of DM2 in Saudi Arabia. Full article

Carbon nanotube–glue composite gel-based surface-type elastic sensors with a cylindrical shape deformable (flexible) metallic body were fabricated for tactile pressure and compressive displacement sensing. The fabrication of the sensors was performed using the rubbing-in technique. The effect of the pressure and the compressive displacement on the capacitance and the impedance of the sensors were investigated at various frequencies (in the range of 1 kHz to 200 kHz). It was found that under the effect of pressure from 0 to 9 g/cm², the capacitance increased by 1.86 and 1.78 times, while the impedance decreased by 1.84 and 1.71 times at the frequencies of 1 kHz to 200 kHz, respectively. The effect of displacement on the impedance and the capacitance of the device was also investigated at various frequencies from 1 kHz to 200 kHz. The results showed that under the effect of compressive displacement up to 25 µm, the impedance of the sensors decreased on average by 1.19 times, while the capacitance increased by 1.09 times, accordingly. The frequency response of the displacement sensor showed that it matched with the low-pass filter. The obtained results are explained based on changes in the shape and geometrical parameters of the cylindrical-shaped conductive body. These results have also been explained on the basis of the distance between the conductive plates of the capacitive sensors during compression, which takes place under the effect of applied pressure or displacement. Moreover, the design of the sensors is simple and easy to fabricate, and their use is also earthy. The fabricated sensors have great potential for commercialization. Full article

Multidrug-resistant strains are frequent causes of nosocomial infections. The majority of nosocomial infections, particularly in critical care units (ICU), have been linked to A. baumannii, which has major clinical significance. The current paper attempts to identify the potential risk and prognosis factors for acquiring an infection due to A. baumannii compared to that of other nosocomial bacteria. In our study, we employed antibiotics generally prescribed for the initial course of treatment such as colistin, meropenem, amikacin, trimethoprime-sulfamethoxazole, levofloxacin, gentamicin, ciprofloxacin, and piperacillin-tazobactam. We found that the isolated A. baumannii were resistant at a high rate to meropenem, piperacillin–tazobactam, amikacin, levofloxacin, and ciprofloxacin, while they were partially susceptible to trimethoprim-sulfamethoxazole. Our study revealed that A. baumannii was most susceptible to gentamicin and colistin at 85.8% and 92.9%, respectively, whereas the combination of colistin and trimethoprim/sulfamethoxazole was 100% active. The patients were the primary source of infection with A. baumannii, followed by inanimate objects present in the ICU and hospital premises, and then the hospital staff who were taking care of the ICU patients. Gentamicin and colistin were the most sensitive antibiotics; of the 13 tested in total, the rate of drug resistance was above 50%. The very high rate of antibiotic resistance is alarming. Full article

This research attempts to find a new approach for the removal of arsenic (As) from drinking water by developing a novel solution. To the author’s knowledge, iron-loaded activated carbons (Fe-AC) have not been previously applied for the removal of As in a synergistic process using ozonation and catalytic ozonation processes. The As was investigated using drinking water samples in different areas of Lahore, Pakistan, and the As removal was compared with and without using catalysts. The results also suggested that the catalytic ozonation process significantly removes As as compared with single ozonation and adsorption processes. Moreover, a feed ozone of 1.0 mg/min and catalyst dose of 10 g was found to maintain a maximum removal efficiency of 98.6% within 30 min. The results of the catalyst dose–effect suggested that the removal of As tends to increase with the increase in catalysts amount. Hence, it is concluded that the Fe-AC/O₃ process efficiently removes As in water. Moreover, it was established that the Fe-AC/O₃ process might be regarded as an effective method for removing As from drinking water compared to the single ozonation and adsorption processes. Full article

In today’s world, efficiency and margin of safety are prime considerations for any applications. To address such parameters in aerospace or high-tech consumer products, there are still limitations in terms of capabilities from a material perspective. Aluminium 7075 is predominantly used as a combination material in these applications, but it has many drawbacks such as early wear/friction, low fatigue life cycle, high weight ratios, high deformation and stresses. To overcome these key issues, many reinforcements have been used to date. However, the results are not so convincing with respect to tribological applications, and the aforementioned issues still persist. In the current work, a novel hybrid composite comprising Aluminium 7075 as substrate and the reinforcement of silicon carbide and aluminium oxide at varying combinations of 3 to 9% in steps of 3% and a constant percentage of 5% were added, respectively. The exhaustive work focuses on extracting the mechanical, tribological and physical properties of a hybrid composite. Furthermore, a microcharacterisation study of these combinations was carried out using FE-SEM and EDX. In a continuation to this simulation, a study was performed using ANSYS Workbench to identify a suitable gear application with real-time loading conditions. The observed results show a tensile strength of 366 MPa for 6%SiC, hardness of 93 VHN and wear rate of 0.00025 mm³/Nm for the 9%SiC combination. Full article

Vaccination has a major role in the control of the COVID-19 pandemic. The behavior toward accepting the COVID-19 vaccine is complex and multifactorial, while the level of acceptance and hesitancy depends on many factors. This study aims to measure the level of vaccine acceptance among Jazan University students and identify its predictors. In this cross-sectional study, an online questionnaire based on the health belief model (HBM) was sent through social media “WhatsApp” to two strata of students selected by convenient sampling. The overall desire to get vaccinated was noted in 83.6% of participants, and 16.4% reported no desire to be vaccinated. The constructs of the HBM were shown to significantly predict vaccine acceptance with the exception of “perceived susceptibility”. In conclusion, the level of acceptance of the COVID-19 vaccine among Jazan University students was relatively high. The HBM constructs are important predictors of the vaccination behavior with the exception of the construct “perceived susceptibility”. Full article

Polypyrrole (PPy) and polypyrrole/cerium oxide nanocomposite (PPy/CeO₂) were prepared by the chemical oxidative method in an aqueous medium using anhydrous ferric chloride (FeCl₃) as an oxidant. The successful formulation of materials was confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmittance electron microscopy (TEM). A four-in-line probe device was used for studying DC electrical conductivity and ammonia vapor sensing properties of PPy and PPy/CeO₂. The significant improvement in both the conductivity and sensing parameters of PPy/CeO₂ compared to pristine PPy reveals some synergistic/electronic interaction between PPy and cerium oxide nanoparticles (CeO₂ NPs) working at molecular levels. The initial conductivity (i.e., conductivity at room temperature) was found to be 0.152 Scm⁻¹ and 1.295 Scm⁻¹ for PPy and PPy/CeO₂, respectively. Also, PPy/CeO₂ showed much better conductivity retention than pristine PPy under both the isothermal and cyclic ageing conditions. Ammonia vapor sensing was carried out at different concentration (0.01, 0.03, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 vol %). The sensing response of PPy/CeO₂ varied with varying concentrations. At 0.5 vol % ammonia concentration, the % sensing response of PPy and PPy/CeO₂ sensor was found to be 39.1% and 93.4%, respectively. The sensing efficiency of the PPy/CeO₂ sensor was also evaluated at 0.4. 0.3, 0.2, 0.1, 0.05, 0.03, and 0.01 vol % ammonia concentration in terms of % sensing response, response/recovery time, reversibility, selectivity as well as stability at room temperature. Full article

Computed tomography (CT) is a key imaging technique in diagnostic radiology, providing highly sensitive and specific information. While its use has increased dramatically in recent years, the quantity and associated risks of radiation from CT scans present major challenges, particularly in paediatrics. The fundamental principles of radiation protection require that radiation quantities be as low as reasonably achievable and CT use must be justified, particularly for paediatric patients. CT radiation knowledge is a key factor in optimising and minimising radiation risk. The objective of this study was to analyse knowledge level, expertise, and competency regarding CT radiation dose and its hazards in paediatrics among radiologists in Saudi Arabian hospitals. A self-reported, multiple-choice questionnaire assessed the attitudes and opinions of radiologists involved in imaging studies using ionising radiation. Among the total respondents, 65% ± 13.5% had a good comprehension of the dangers of carcinogenicity to the patient resulting from CT scans, with 80% presuming that cancer risks were elevated. However, only 48.5%, 56.5%, and 65% of the respondents were aware of specific radiation risks in head, chest, and abdominal paediatric examinations, respectively. Regular, frequent, and specific training courses are suggested to improve the fundamental knowledge of CT radiation among radiologists and other physicians. Full article