We are pleased to invite you to read the selected papers in Polymers (ISSN: 2073-4360) in the Section “Polymer Physics and Theory”. The paper list is as follows:

1. “A Review on Modeling Cure Kinetics and Mechanisms of Photopolymerization”
by Margit Lang, Stefan Hirner, Frank Wiesbrock and Peter Fuchs
Polymers 2022, 14(10), 2074; https://doi.org/10.3390/polym14102074
Available online: https://www.mdpi.com/2073-4360/14/10/2074

2. “Machine Learning Approach to Predict Physical Properties of Polypropylene Composites: Application of MLR, DNN, and Random Forest to Industrial Data”
by Chonghyo Joo, Hyundo Park, Hyukwon Kwon, Jongkoo Lim, Eunchul Shin, Hyungtae Cho and Junghwan Kim
Polymers 2022, 14(17), 3500; https://doi.org/10.3390/polym14173500
Available online: https://www.mdpi.com/2073-4360/14/17/3500

3. “Aero Grade Epoxy Vitrimer towards Commercialization”
by Alaitz Ruiz de Luzuriaga, Nerea Markaide, Asier M. Salaberria, Itxaso Azcune, Alaitz Rekondo and Hans Jürgen Grande
Polymers 2022, 14(15), 3180; https://doi.org/10.3390/polym14153180
Available online: https://www.mdpi.com/2073-4360/14/15/3180

4. “Modelling of Environmental Ageing of Polymers and Polymer Composites—Modular and Multiscale Methods”
by Andrey E. Krauklis, Christian W. Karl, Iuri B. C. M. Rocha, Juris Burlakovs, Ruta Ozola-Davidane, Abedin I. Gagani and Olesja Starkova
Polymers 2022, 14(1), 216; https://doi.org/10.3390/polym14010216
Available online: https://www.mdpi.com/2073-4360/14/1/216

5. “DPD Modelling of the Self- and Co-Assembly of Polymers and Polyelectrolytes in Aqueous Media: Impact on Polymer Science”
by Karel Procházka, Zuzana Limpouchová, Miroslav Štěpánek, Karel Šindelka and Martin Lísal
Polymers 2022, 14(3), 404; https://doi.org/10.3390/polym14030404
Available online: https://www.mdpi.com/2073-4360/14/3/404

6. “Hybrid Epoxy Nanocomposites: Improvement in Mechanical Properties and Toughening Mechanisms—A Review”
by Anita Białkowska, Mohamed Bakar, Wojciech Kucharczyk and Iwona Zarzyka
Polymers 2023, 15(6), 1398; https://doi.org/10.3390/polym15061398
Available online: https://www.mdpi.com/2073-4360/15/6/1398

7. “Material-Dependent Effect of Common Printing Parameters on Residual Stress and Warpage Deformation in 3D Printing: A Comprehensive Finite Element Analysis Study”
by Hussein Alzyod and Peter Ficzere
Polymers 2023, 15(13), 2893; https://doi.org/10.3390/polym15132893
Available online: https://www.mdpi.com/2073-4360/15/13/2893

8. “Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering”
by Anouar El Magri, Salah Eddine Bencaid, Hamid Reza Vanaei and Sébastien Vaudreuil
Polymers 2022, 14(17), 3674; https://doi.org/10.3390/polym14173674
Available online: https://www.mdpi.com/2073-4360/14/17/3674