Effect of KCl Addition on First Hydrogenation Kinetics of TiFe

In this paper, the effect of the addition of potassium chloride (KCl) by ball milling on the first hydrogenation kinetics of TiFe is reported. After milling, KCl was uniformly distributed on the TiFe’s surface. As-synthesized TiFe does not absorb hydrogen. However, after ball milling with KCl, it absorbed 1.5 wt.% of hydrogen on the first hydrogenation without any thermal treatment. The storage capacity of TiFe with KCl addition is higher than that of the ball milled pure TiFe. The effects of the amount of KCl additive in TiFe and ball milling time on first hydrogenation kinetics are reported. It is noted that, with an increase in KCl amount and ball milling time, hydrogenation kinetics are improved. However, hydrogen storage capacity decreased for both cases.