Next Article in Journal
ROS 2-Based Framework for Semi-Automatic Vector Map Creation in Autonomous Driving Systems
Previous Article in Journal
Integrating a Stereo Vision System on the F1Tenth Platform for Enhanced Perception
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Editorial

Statement of Peer Review †

1
School of Computing and Engineering, University of West London, St Mary’s Road, Ealing, London W5 5RF, UK
2
The Faringdon Research Centre for Non-Destructive Testing and Remote Sensing, University of West London, St Mary’s Road, Ealing, London W5 5RF, UK
3
Department of Civil, Computer Science and Aeronautical Technologies Engineering, Roma Tre University, Via Vito Volterra 62, 00146 Roma, Italy
4
Geo-Environmental Cartography and Remote Sensing Group (CGAT), Universitat Politècnica de València, 46022 Valencia, Spain
*
Author to whom correspondence should be addressed.
All papers published in the volume were presented at the 1st International Conference on Advanced Remote Sensing (ICARS 2025), Barcelona, Spain, 26–28 March 2025; Available online: https://sciforum.net/event/ICARS2025.
Eng. Proc. 2025, 94(1), 28; https://doi.org/10.3390/engproc2025094028
Published: 29 October 2025
In submitting conference proceedings to Engineering Proceedings, the Volume Editors of the proceedings would like to certify to the publisher that all papers published in this volume have been subjected to peer review by the designated expert referees and were administered by the Volume Editors.
The whole process was supervised by the conference committee and the Volume Editors and adhered to the professional and scientific standards expected from a proceedings journal published by MDPI and complied with the peer review policy and guidelines of Engineering Proceedings, which can be found at the following link: https://www.mdpi.com/journal/engproc/instruction_for_conference_organizers. The review reports were checked and archived by the Editorial Office of Engineering Proceedings.
  • Type of peer review: single-blind;
  • Conference submission management system: SuSy;
  • Number of submissions received: 34;
  • Number of submissions sent for review: 32;
  • Number of submissions accepted: 26;
  • Acceptance rate (number of submissions accepted/number of submissions received): 76.5%;
  • Average number of reviews per paper: 1.15;
  • Total number of reviewers involved: 37.

Conflicts of Interest

The authors declare no conflicts of interest.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Tosti, F.; Benedetto, A.; Ruiz, L.Á. Statement of Peer Review. Eng. Proc. 2025, 94, 28. https://doi.org/10.3390/engproc2025094028

AMA Style

Tosti F, Benedetto A, Ruiz LÁ. Statement of Peer Review. Engineering Proceedings. 2025; 94(1):28. https://doi.org/10.3390/engproc2025094028

Chicago/Turabian Style

Tosti, Fabio, Andrea Benedetto, and Luis Ángel Ruiz. 2025. "Statement of Peer Review" Engineering Proceedings 94, no. 1: 28. https://doi.org/10.3390/engproc2025094028

APA Style

Tosti, F., Benedetto, A., & Ruiz, L. Á. (2025). Statement of Peer Review. Engineering Proceedings, 94(1), 28. https://doi.org/10.3390/engproc2025094028

Article Metrics

Back to TopTop