Chainando, N.; Martawidjaja, M.; Darius, R.A.; Yahya, L.C.; Yemima, S.; Tan, W.S.; Harito, C.; Chandra, R.C.; Andhini, G.K.; Putra, K.B.;
et al. Applying 3D Scanning and Printing Techniques to Produce Upper Limb Prostheses: Bibliometric Analysis and Scoping Review. Prosthesis 2025, 7, 26.
https://doi.org/10.3390/prosthesis7020026
AMA Style
Chainando N, Martawidjaja M, Darius RA, Yahya LC, Yemima S, Tan WS, Harito C, Chandra RC, Andhini GK, Putra KB,
et al. Applying 3D Scanning and Printing Techniques to Produce Upper Limb Prostheses: Bibliometric Analysis and Scoping Review. Prosthesis. 2025; 7(2):26.
https://doi.org/10.3390/prosthesis7020026
Chicago/Turabian Style
Chainando, Nico, Marcel Martawidjaja, Raphael Albert Darius, Leonardo Carlos Yahya, Sharon Yemima, Wilson Susanto Tan, Christian Harito, Rafa Callista Chandra, Grasheli Kusuma Andhini, Ketut Bagus Putra,
and et al. 2025. "Applying 3D Scanning and Printing Techniques to Produce Upper Limb Prostheses: Bibliometric Analysis and Scoping Review" Prosthesis 7, no. 2: 26.
https://doi.org/10.3390/prosthesis7020026
APA Style
Chainando, N., Martawidjaja, M., Darius, R. A., Yahya, L. C., Yemima, S., Tan, W. S., Harito, C., Chandra, R. C., Andhini, G. K., Putra, K. B., Lumban Tobing, C. C., Syafi’i, M., & Syafrudin, M.
(2025). Applying 3D Scanning and Printing Techniques to Produce Upper Limb Prostheses: Bibliometric Analysis and Scoping Review. Prosthesis, 7(2), 26.
https://doi.org/10.3390/prosthesis7020026
