Next Article in Journal
A Method of Ship Detection under Complex Background
Next Article in Special Issue
LandXML Encoding of Mixed 2D and 3D Survey Plans with Multi-Level Topology
Previous Article in Journal
Extraction of Terraces on the Loess Plateau from High-Resolution DEMs and Imagery Utilizing Object-Based Image Analysis
Previous Article in Special Issue
A Country Profile of the Czech Republic Based on an LADM for the Development of a 3D Cadastre
Open AccessArticle

Registration of Multi-Level Property Rights in 3D in The Netherlands: Two Cases and Next Steps in Further Implementation

1
3D Geoinformation, Delft University of Technology, 2628 BL Delft, The Netherlands
2
Kadaster, 7311 KZ Apeldoorn, The Netherlands
3
Geo-information and Land Development, Delft University of Technology, 2628 BL Delft, The Netherlands
4
Faculty of Law, Vrije Universiteit Amsterdam, 1081 HV Amsterdam, The Netherlands
5
Municipality of Delft, 2627 BM Delft, The Netherlands
*
Author to whom correspondence should be addressed.
This article is an expanded version of the previously published workshop paper: Stoter, J.; Ploeger, H.; Roes, R.; van der Riet, E.; Biljecki, F.; Ledoux, H. (2016): First 3D Cadastral Registration of Multi-level Ownerships Rights in The Netherlands. Proceedings of the 5th International FIG Workshop on 3D Cadastres, Athens, Greece, pp. 491–504.
ISPRS Int. J. Geo-Inf. 2017, 6(6), 158; https://doi.org/10.3390/ijgi6060158
Received: 31 March 2017 / Revised: 12 May 2017 / Accepted: 24 May 2017 / Published: 31 May 2017
(This article belongs to the Special Issue Research and Development Progress in 3D Cadastral Systems)
This article reports on the first 3D cadastral registration in The Netherlands, accomplished in March 2016. The solution was sought within the current cadastral, organisational, and technical frameworks to obtain a deeper knowledge on the optimal way of implementing 3D registration, while avoiding discussions between experts from different domains. The article presents the developed methodology to represent legal volumes in an interactive 3D visualisation that can be registered in the land registers. The source data is the 3D Building Information Model (BIM). The methodology is applied to two cases: (1) the case of the railway station in Delft, resulting in the actual 3D registration in 2016; and (2) a building complex in Amsterdam, improving the Delft-case and providing the possibility to describe a general workflow from design data to a legal document. An evaluation provides insights for an improved cadastral registration of multi-level property rights. The main conclusion is that in specific situations, a 3D approach has important advantages for cadastral registration over a 2D approach. Further study is needed to implement the solution in a standardised and uniform way, from registration to querying and updating in the future, and to develop a formal registration process accordingly. View Full-Text
Keywords: 3D cadastral registration; architectural models (BIM); 3D deed; 3D land administration 3D cadastral registration; architectural models (BIM); 3D deed; 3D land administration
Show Figures

Figure 1

MDPI and ACS Style

Stoter, J.; Ploeger, H.; Roes, R.; Riet, E.; Biljecki, F.; Ledoux, H.; Kok, D.; Kim, S. Registration of Multi-Level Property Rights in 3D in The Netherlands: Two Cases and Next Steps in Further Implementation. ISPRS Int. J. Geo-Inf. 2017, 6, 158.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map

1
Back to TopTop