Next Article in Journal
Assessment of Surface Water Availability under Climate Change Using Coupled SWAT-WEAP in Hongshui River Basin, China
Next Article in Special Issue
Simulation of Land-Use Changes Using the Partitioned ANN-CA Model and Considering the Influence of Land-Use Change Frequency
Previous Article in Journal
Surveying Reality (SurReal): Software to Simulate Surveying in Virtual Reality

The Extension of IFC For Supporting 3D Cadastre LADM Geometry

Faculty of Civil Engineering, University of Belgrade, Bulevar kralja Aleksandra 73, 11000 Belgrade, Serbia
Author to whom correspondence should be addressed.
Academic Editors: Wolfgang Kainz and Costantino Domenica
ISPRS Int. J. Geo-Inf. 2021, 10(5), 297;
Received: 1 March 2021 / Revised: 21 April 2021 / Accepted: 2 May 2021 / Published: 5 May 2021
The growth of densely populated urban areas has caused traditional cadastral registration systems to face many difficulties in representing complex and multilevel property situations on 2D maps. These challenges, combined with the rapid development of 3D technologies, have forced the research and progress of 3D cadastre systems. The aim of this study is to investigate how a Building Information Model (BIM) can be used as a data source for the Land Administration Domain Model (LADM) based 3D cadastre system, and how that process can be improved. The Industry Foundation Classes (IFC) format and the LADM-based model were selected because both are international open standards that have a significant impact in their own domain. The data sample for the 3D cadastre system was extracted from a BIM model. The paper proposes an IFC format extension which makes it possible to define 3D geometry according to the LADM standard. In order to demonstrate this extension, the West 65 residential and business complex, Belgrade, was selected as a case study. The IFC format extension presented here is a step towards data harmonization between BIM in the IFC format and 3D cadastre systems; it should provide more suitable data in the current IFC schema and enable easy data flow between BIM projects and 3D cadastral data. View Full-Text
Keywords: BIM; IFC; 3D cadastre; LADM; 3D visualization BIM; IFC; 3D cadastre; LADM; 3D visualization
Show Figures

Figure 1

MDPI and ACS Style

Petronijević, M.; Višnjevac, N.; Praščević, N.; Bajat, B. The Extension of IFC For Supporting 3D Cadastre LADM Geometry. ISPRS Int. J. Geo-Inf. 2021, 10, 297.

AMA Style

Petronijević M, Višnjevac N, Praščević N, Bajat B. The Extension of IFC For Supporting 3D Cadastre LADM Geometry. ISPRS International Journal of Geo-Information. 2021; 10(5):297.

Chicago/Turabian Style

Petronijević, Marija, Nenad Višnjevac, Nataša Praščević, and Branislav Bajat. 2021. "The Extension of IFC For Supporting 3D Cadastre LADM Geometry" ISPRS International Journal of Geo-Information 10, no. 5: 297.

Find Other Styles
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

Back to TopTop