Next Article in Journal
Experimental and Simulation Study on Tool Life Models in Drilling of Forging Brass Using Uncoated-WC and AlCrN Coated-WC Tools
Previous Article in Journal
Improving Thickness Uniformity of Mo/Si Multilayers on Curved Spherical Substrates by a Masking Technique
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Coatings
Volume 9
Issue 12
10.3390/coatings9120852
coatings-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements Under Marine Alternating Hydrostatic Pressure

by
Fandi Meng
1,
Yushan Liu
1,
Li Liu
1,*,
Yu Cui
2 and
Fuhui Wang
1,2
1
Shenyang National Laboratory for Materials Science, Northeastern University, Wenhua Road 3-11, Shenyang 110819, China
2
Institute of Metal Research, Chinese Academy of Sciences, Wencui Road 62, Shenyang 110016, China
*
Author to whom correspondence should be addressed.
Coatings 2019, 9(12), 852; https://doi.org/10.3390/coatings9120852
Submission received: 11 November 2019 / Revised: 8 December 2019 / Accepted: 11 December 2019 / Published: 12 December 2019
Browse Figures
Versions Notes

Abstract

Electrochemical noise (EN) is expected to be an in-situ evaluation method for coating performance in the real deep-ocean environment. The asymmetric factors of working electrodes (WEs) in EN configuration, including coating area, coating thickness, and coating impedance, were considered under marine alternating hydrostatic pressure (AHP) condition. The effect of WE asymmetry was discussed mainly by EN time records, wavelet analysis and shot noise method. The results indicated that coating impedance is the most important factor, and the coating with higher impedance contributes more to current noise in a pair of electrodes. The reason of asymmetry influence on EN measurements is mainly by the variation of average charge of current sources but not the current source frequency during the initial period of coating failure process. When the obvious corrosion of metal substrate happens, the corresponding EN proportion relationship between coating/metal WEs may be not exist.
Keywords: epoxy coating; electrochemical noise; asymmetric electrode; shot noise analysis; wavelet analysis; alternating hydrostatic pressure epoxy coating; electrochemical noise; asymmetric electrode; shot noise analysis; wavelet analysis; alternating hydrostatic pressure

Share and Cite

MDPI and ACS Style

Meng, F.; Liu, Y.; Liu, L.; Cui, Y.; Wang, F. Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements Under Marine Alternating Hydrostatic Pressure. Coatings 2019, 9, 852. https://doi.org/10.3390/coatings9120852

AMA Style

Meng F, Liu Y, Liu L, Cui Y, Wang F. Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements Under Marine Alternating Hydrostatic Pressure. Coatings. 2019; 9(12):852. https://doi.org/10.3390/coatings9120852

Chicago/Turabian Style

Meng, Fandi, Yushan Liu, Li Liu, Yu Cui, and Fuhui Wang. 2019. "Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements Under Marine Alternating Hydrostatic Pressure" Coatings 9, no. 12: 852. https://doi.org/10.3390/coatings9120852

APA Style

Meng, F., Liu, Y., Liu, L., Cui, Y., & Wang, F. (2019). Effect of Asymmetric Epoxy Coating/Metal Electrodes on the Electrochemical Noise Measurements Under Marine Alternating Hydrostatic Pressure. Coatings, 9(12), 852. https://doi.org/10.3390/coatings9120852

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop