The Biosensors Editorial Office wishes to correct the following errors in this paper [1]. Figure 6 is the same as Figure 7. The correct version of Figure 6 is as follows:
Figure 6.
Change of charge transfer resistance (Rct) due to lysozyme exposure to bare SPCE (black bars) and printed SPCE (red bars) for different lysozyme concentrations.
In addition, there is one misspelled word, “Stabdard” in the equation in Appendix D which has been corrected to “Standard”.
The errors were made during production. We apologize for any inconvenience caused to the readers and authors by these mistakes. The manuscript will be updated and the original version will remain online on the article website.
Reference
- Khan, N.I.; Maddaus, A.G.; Song, E. A Low-Cost Inkjet-Printed Aptamer-Based Electrochemical Biosensor for the Selective Detection of Lysozyme. Biosensors 2018, 8, 7. [Google Scholar] [CrossRef] [PubMed]
© 2018 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).