Next Article in Journal
Synthesis of Three-Dimensional Graphene-Based Hybrid Materials for Water Purification: A Review
Previous Article in Journal
Preparation and Characterization of Nanocomposite Films Containing Nano-Aluminum Nitride and Cellulose Nanofibrils
Open AccessArticle

Two-Dimensional Hybrid Composites of SnS2 Nanosheets Array Film with Graphene for Enhanced Photoelectric Performance

1
SZU-NUS Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, College of Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China
2
College of Electronic Science and Technology, Shenzhen University, Shenzhen 518060, China
3
School of Physics and Telecommunication Engineering, South China Normal University, Guangzhou 510006, China
4
Key Laboratory of Material Physics of Ministry of Education, School of Physics and Engineering, Zhengzhou University, Zhengzhou 450052, China
*
Author to whom correspondence should be addressed.
Nanomaterials 2019, 9(8), 1122; https://doi.org/10.3390/nano9081122
Received: 7 July 2019 / Revised: 22 July 2019 / Accepted: 24 July 2019 / Published: 3 August 2019
  |  
PDF [2038 KB, uploaded 3 August 2019]
  |  

Abstract

Two-dimensional (2D) metal dichalcogenides have attracted considerable attention for use in photoelectric devices due to their unique layer structure and strong light-matter interaction. In this paper, vertically grown SnS2 nanosheets array film was synthesized by a facile chemical bath deposition (CBD). The effects of deposition time and annealing temperature on the quality of SnS2 films was investigated in detail. By optimizing the preparation conditions, the SnS2 array film exhibited efficient photoelectric detection performance under sunlight. Furthermore, in order to improve the performance of the photodetector based on SnS2 nanosheets film, a transparent graphene film was introduced as the hole-transport layer by wet-chemical method directly transferring techniques. Graphene/SnS2 nanosheets array film heterojunction photodetectors exhibit enhanced photoresponsivity. The light on/off ratio of the photodetector based on graphene/SnS2 was 1.53, about 1.4 times higher than that of the pristine SnS2 array films. The improved photoresponse performance suggested that the effective heterojunction between vertical SnS2 nanosheets array film and graphene suppresses the recombination of photogenerated carriers. The results indicate that the graphene/SnS2 heterojunction photodetectors have great potential in photodetection devices. View Full-Text
Keywords: graphene/SnS2 heterojunction; charge separation; photodetectors graphene/SnS2 heterojunction; charge separation; photodetectors
Figures

Figure 1

This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).

Supplementary material

SciFeed

Share & Cite This Article

MDPI and ACS Style

Fang, F.; Li, H.; Yao, H.; Jiang, K.; Liu, Z.; Lin, C.; Chen, F.; Wang, Y.; Liu, L. Two-Dimensional Hybrid Composites of SnS2 Nanosheets Array Film with Graphene for Enhanced Photoelectric Performance. Nanomaterials 2019, 9, 1122.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Nanomaterials EISSN 2079-4991 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top