Ozone Decomposition on MO/Al₂O₃-CaO (M = Ni, Co, Cu) Catalysts

The NiO/Al₂O₃-CaO, CuO/Al₂O₃-CaO and CoO/Al₂O₃-CaO catalytic systems were investigated for the decomposition of ozone. Each of the three different Al₂O₃-CaO carriers was obtained after treatment of the initial precursor at 1100 °C for 2, 4 and 6 h, respectively, to examine the effect of annealing on support calcination. AAS, XRD, XPS, EPR, SEM and BET were applied for sample characterization. The carrier comprises a mixture of corundum α-Al₂O₃, θ-Al₂O₃ and Ca₃Al₂O₃. The XRD spectra of the active phases of the catalysts show the existence of Co₃O₄, NiO, Ni₂O₃ and CuO. The SEM micrographs reveal spherical particles for the NiO/Al₂O₃–CaO sample. In contrast, the CoO/Al₂O₃–CaO sample exhibits a morphology composed of wool-like fibers and perpendicularly oriented plate-like structures. The CuO/Al₂O₃–CaO sample consists not only of fibrous structures but also of distinct, separated aggregates. The obtained catalysts have highly developed specific surface areas. Their catalytic activity depends on the calcination conditions of the support, and the best results are observed after 2h treatment for all of the investigated samples due to the smaller crystallite size and higher specific surface area. The activity of the investigated catalysts for the ozone decomposition reaction follows the order NiO/Al₂O₃-CaO > CoO/Al₂O₃-CaO > CuO/Al₂O₃-CaO.