Skip to Content
Applied SciencesApplied Sciences
  • Article
  • Open Access

12 March 2025

32 Pages

Design and Calibration of a Sensory System of an Adaptive Gripper

,
,
and
1
Department of Product Design, Mechatronics and Environment, Transilvania University of Brasov, 500036 Brasov, Romania
2
Department of Mechanical Engineering, Transilvania University of Brasov, 500036 Brasov, Romania
3
Solid Mechanics Institute of the Romanian Academy, Str C-tin Mille 15, 010141 Bucharest, Romania
4
Technical Sciences Academy of Romania, 010141 Bucharest, Romania
This article belongs to the Special Issue Applied Electronics and Functional Materials

Abstract

The design and calibration of an adaptive gripper’s sensor system are presented in this research. Including the final constructive variants, the variants of the planned force sensor and slip sensors are detailed, highlighting their primary functional and constructive features. The key elements regarding the calibration of the force and slip sensors on each gripper module of the adaptive gripper are then displayed. Each sensor must be examined and calibrated independently due to its construction particularities. The important force and slip sensor behavior graphs are displayed, along with the calibration needed to ensure the adaptive gripper operates as intended. This paper suggestively shows, among the few papers of this kind, for the first time, the laborious but absolutely necessary process of calibrating force and slip sensors for gripping in general, and for adaptive gripping in particular.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.