Next Article in Journal
Manganese-based Permanent Magnets
Previous Article in Journal
A Computationally-Efficient Numerical Model to Characterize the Noise Behavior of Metal-Framed Walls
Previous Article in Special Issue
On the Effect of Pouring Temperature on Spheroidal Graphite Cast Iron Solidification
Open AccessEditorial

Advances in Solidification Processing

Department of Materials Science and Engineering, CEAS, University of Wisconsin-Milwaukee, 3200 N. Cramer Street, Milwaukee, WI 53211, USA
Metals 2015, 5(3), 1432-1434; https://doi.org/10.3390/met5031432
Received: 24 July 2015 / Accepted: 24 July 2015 / Published: 11 August 2015
(This article belongs to the Special Issue Advances in Solidification Processing)
Note: In lieu of an abstract, this is an excerpt from the first page.

Melt solidification is the shortest and most viable route to obtain components, starting from the design to the finished products. Hence, a sound knowledge of the solidification of metallic materials is essential for the development of advanced structural metallic components that drive modern technological societies. As a result, there have been innumerable efforts and full conferences dedicated to this important subject [1–6]. In addition, there are various scientific journals fully devoted to investigating the various aspects which give rise to various solidification microstructures [7–9]. [...] View Full-Text
MDPI and ACS Style

Lopez, H.F. Advances in Solidification Processing. Metals 2015, 5, 1432-1434.

Show more citation formats Show less citations formats

Article Access Map

1
Only visits after 24 November 2015 are recorded.
Back to TopTop