Next Article in Journal
Influence of Geometrical Design on Defect Formation of Commercial Al-Si-Cu-Mg Alloy Fabricated by High-Pressure Diecasting: Structural Observation and Simulation Validation
Previous Article in Journal
A Data-Driven Methodology for Obtaining the Stress–Strain Curves of Metallic Materials Using Discrete Indentation Tests
Previous Article in Special Issue
On the Mechanical Behavior of LP-DED C103 Thin-Wall Structures
 
 
Article

Article Versions Notes

Metals 2025, 15(1), 41; https://doi.org/10.3390/met15010041
Action Date Notes Link
article xml file uploaded 4 January 2025 10:27 CET Original file -
article xml uploaded. 4 January 2025 10:27 CET Update https://www.mdpi.com/2075-4701/15/1/41/xml
article pdf uploaded. 4 January 2025 10:27 CET Version of Record https://www.mdpi.com/2075-4701/15/1/41/pdf
article html file updated 4 January 2025 10:29 CET Original file https://www.mdpi.com/2075-4701/15/1/41/html
Back to TopTop