Next Article in Journal
Research Status and Prospective Properties of the Al-Zn-Mg-Cu Series Aluminum Alloys
Next Article in Special Issue
Microstructural Evolution and Mechanical Behavior of TA15 Titanium Alloy Fabricated by Selective Laser Melting: Influence of Solution Treatment and Aging
Previous Article in Journal
Microstructure and Tribological Behavior of Cr-Mn-N Steel with Age-Hardened Near-Surface Layer including CrN and Fe2N Particles Intended for Use in Orthopedic Implants
Previous Article in Special Issue
Aluminum Bronze Crystallization on Deformed Base during Electron Beam Additive Manufacturing
 
 

Order Article Reprints

Journal: Metals, 2023
Volume: 13
Number: 1327

Article: A Review of Additive Manufacturing Techniques and Post-Processing for High-Temperature Titanium Alloys
Authors: by Binquan Jin, Qing Wang, Lizhong Zhao, Anjian Pan, Xuefeng Ding, Wei Gao, Yufeng Song and Xuefeng Zhang
Link: https://www.mdpi.com/2075-4701/13/8/1327

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop