Next Article in Journal
18Ni300 Maraging Steel Lattice Structures Fabricated via Laser Powder Bed Fusion—Mechanical Behavior and Gas Permeability
Next Article in Special Issue
Improved Interface Morphology and Failure Load of Ultrasonic-Assisted Friction Stir Lap Welding Joint of 2024 Aluminum Alloy to 304 Stainless Steel
Previous Article in Journal
Fe-Containing Al-Based Alloys: Relationship between Microstructural Evolution and Hardness in an Al-Ni-Fe Alloy
Previous Article in Special Issue
Interfacial Microstructure Produced during Dissimilar AA6013/Ti-6Al-4V Friction Stir Lap Welding under Zero-Penetration Condition
 
 

Order Article Reprints

Journal: Metals, 2023
Volume: 13
Number: 1981

Article: Introduction of Coal Reinforcing Particles on the Dissimilar FSW AA608/AA5083 Joint via Friction Stir Processing
Authors: by Keegan Zass, Sipokazi Mabuwa and Velaphi Msomi
Link: https://www.mdpi.com/2075-4701/13/12/1981

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop