Correction: Seleznev et al. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385

Seleznev, Anton; Pinargote, Nestor Washington Solis; Smirnov, Anton

doi:10.3390/met12050728

Open AccessCorrection

Correction: Seleznev et al. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385

by

Anton Seleznev

^1,*

,

Nestor Washington Solis Pinargote

²

and

Anton Smirnov

^2,*

¹

Spark Plasma Sintering Research Laboratory, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, Moscow 127055, Russia

²

Laboratory of 3D Structural and Functional Engineering, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, Moscow 127055, Russia

^*

Authors to whom correspondence should be addressed.

Metals 2022, 12(5), 728; https://doi.org/10.3390/met12050728

Submission received: 9 December 2021 / Accepted: 4 March 2022 / Published: 25 April 2022

Download Versions Notes

Incorrect Reference

In the original article [1], the reference [136] was incorrectly written as “Askibas, N.C.; Demir, O. The effect of cation type, intergranular phase amount and cation mole ratios on z value and intergranular phase crystallization of SiAlON ceramics. Ceram. Int. 2013, 39, 3249–3259”. It should be “Guo, F.; Yuan, J.; Hong, D.; Yin, Z. Influence of powder mixing process on phase composition, microstructure, and mechanical properties of α/β-SiAlON ceramic tool materials. Ceram. Int. 2021, 47, 30256–30265”. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. The original article has been updated.

Reference

Seleznev, A.; Pinargote, N.W.S.; Smirnov, A. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385. [Google Scholar] [CrossRef]

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).

Share and Cite

MDPI and ACS Style

Seleznev, A.; Pinargote, N.W.S.; Smirnov, A. Correction: Seleznev et al. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385. Metals 2022, 12, 728. https://doi.org/10.3390/met12050728

AMA Style

Seleznev A, Pinargote NWS, Smirnov A. Correction: Seleznev et al. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385. Metals. 2022; 12(5):728. https://doi.org/10.3390/met12050728

Chicago/Turabian Style

Seleznev, Anton, Nestor Washington Solis Pinargote, and Anton Smirnov. 2022. "Correction: Seleznev et al. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385" Metals 12, no. 5: 728. https://doi.org/10.3390/met12050728

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Menu

Correction: Seleznev et al. Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 2021, 11, 1385

Incorrect Reference

Reference

Share and Cite

Article Metrics

Article Access Statistics

Further Information

Guidelines

MDPI Initiatives

Follow MDPI