Next Article in Journal
A Novel Reticular Retained Austenite on the Weld Fusion Line of Low Carbon Martensitic Stainless Steel 06Cr13Ni4Mo and the Influence on the Mechanical Properties
Previous Article in Journal
Analysis of the Flatness Form Error in Binder Jetting Process as Affected by the Inclination Angle
Previous Article in Special Issue
A Thermo-Mechanical Analysis of Laser Hot Wire Additive Manufacturing of NAB
 
 

Order Article Reprints

Journal: Metals, 2022
Volume: 12
Number: 431

Article: Predicting the Strength of EBAM 3D Printed Ti-6Al-4V from Processing Conditions
Authors: by Tanya Johnson, Abbey Peters, D. Gary Harlow and Christina Viau Haden
Link: https://www.mdpi.com/2075-4701/12/3/431

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop