Next Article in Journal
Research on the Dynamic Compressive Deformation Behavior of 3D-Printed Ti6Al4V
Next Article in Special Issue
Comparative Study on Microstructure and Corrosion Resistance of Al-Si Alloy Cast from Sand Mold and Binder Jetting Mold
Previous Article in Journal
Investigation of the Solid-Phase Joint of VT-14 Titanium Alloy with 12KH18N10T Stainless Steel Obtained by Diffusion Welding through Intermediate Layers
Previous Article in Special Issue
Fatigue Assessment of Selective Laser Melted Ti-6Al-4V: Influence of Speed Manufacturing and Porosity
 
 
Article

Article Versions Notes

Metals 2021, 11(8), 1326; https://doi.org/10.3390/met11081326
Action Date Notes Link
article xml file uploaded 22 August 2021 11:52 CEST Original file -
article xml uploaded. 22 August 2021 11:52 CEST Update https://www.mdpi.com/2075-4701/11/8/1326/xml
article pdf uploaded. 22 August 2021 11:52 CEST Version of Record https://www.mdpi.com/2075-4701/11/8/1326/pdf
article html file updated 22 August 2021 11:54 CEST Original file -
article html file updated 28 July 2022 07:14 CEST Update https://www.mdpi.com/2075-4701/11/8/1326/html
Back to TopTop