Next Article in Journal
Numerical Study of the Influence of Geometric Features of Dimple Texture on Hydrodynamic Pressure Generation
Previous Article in Journal
Optimization of Thermal Processes Applied to Hypoeutectic White Cast Iron containing 25% Cr Aimed at Increasing Erosive Wear Resistance
Previous Article in Special Issue
Influence of Subflux Turbulence Controller and Ladle Shroud Asymmetric Using on Hydrodynamic Conditions in One Strand Slab Tundish
Open AccessEditorial

Optimization of Industrial Casting Processes

TIMET Professor of Advanced Titanium Processing, Department of Materials Engineering, The University of British Columbia, Vancouver Campus, Frank Forward Building, 309-6350 Stores Road, Vancouver, BC V6T 1Z4, Canada
Metals 2020, 10(3), 360; https://doi.org/10.3390/met10030360
Received: 25 February 2020 / Accepted: 28 February 2020 / Published: 10 March 2020
(This article belongs to the Special Issue Optimization of Industrial Casting Processes)
Note: In lieu of an abstract, this is an excerpt from the first page.

Casting processes have seen continuous technological development for close to 5000 years, largely through a process of trial-and-error improvement [...] View Full-Text
MDPI and ACS Style

Cockcroft, S. Optimization of Industrial Casting Processes. Metals 2020, 10, 360.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop