1. Introduction
The development of the theory of bases in Clifford analysis has indicated its growing relevance in various mathematics and mathematical physics fields. The concept of basic sets (bases) in one complex variable was initially discovered by Whittaker [
1,
2], and the effectiveness terminology was proposed. In this context, a significant contribution was made by Cannon [
3,
4], who proved the necessary and sufficient conditions for a base to possess a finite radius of regularity and to generate entire functions. In [
5], Boas introduced several effectiveness criteria for entire functions.
Despite the fact that our current study has a theoretical framework, the theory of basic sets finds its utility in applications and, in particular, to solve differential equations for real-life phenomena, as indicated in [
6,
7,
8]. Several approaches have been pursued in generalizing the theory of classical complex functions. Among these generalizations are the theory of several complex variables and the matrix approach [
9,
10,
11]. The crucial development of the hypercomplex theory derived from higher-dimensional analysis involving Clifford algebra is called Clifford analysis. In the last decades, Clifford analysis has proved to have substantial influence as an elegant and powerful extension of the theory of holomorphic functions in one complex variable to the Euclidean space of more than two dimensions. The theory of monogenic functions created a solution for a Dirac equation or s generalized Cauchy–Riemann system, both of which are related to Riesz systems [
12]. In a complex setting, holomorphic functions can be described by their differentiability or series expansion for approximations. Accordingly, exploring such representations of monogenic functions in higher-dimensional space is critical. Abul-Ez and Constales [
13] initiated the study of extending Whittaker’s base of polynomials in complex analysis into the context of Clifford analysis as a base of SMPs, which is a Hamel basis of linear space for all SMPs with Clifford-valued coefficients. In [
13,
14], the authors proved that the basic set is effective in the convergence domain when an SMF, 
f, can be represented in terms of a set of SMPs with some conditions. The characterization of the effectiveness property (Clifford–Cannon theorem) was determined for closed balls [
13]. Locally representing a monogenic function in terms of a base of monogenic polynomials is a subject of great interest. Accordingly, the problem of replacing such a base without changing the radius of convergence restricts the class of monogenic functions to the so-called SMFs. Although straightforward generalizations may seem possible, the proof of the Cannon theorem regarding effectiveness (see [
13]) in an 
n-dimensional domain is quite complicated. Abul-Ez and Constales [
13,
14] narrowed the study of the representation of monogenic functions to axially symmetric domains, which they called axially (special) monogenic functions.
A rich treatment of polynomial bases combining the functional and Clifford analyses was proposed [
15], where a criterion of a general type for the effectiveness of bases in Fréchet modules was constructed in various regions. Accordingly, these authors of [
15] studied effectiveness in open and closed balls and offered a remarkable method of application of approximation theory to expand some Clifford-valued functions in terms of an infinite series of Cannon sets of SMPs. A new extension of the well-known Ruscheweyh derivative operator was introduced in [
16], where the representation of certain special monogenic functions in different regions of convergence was investigated in Fréchet modules. The previously mentioned treatment generalizes the results in the complex and Clifford settings given in [
10,
13,
17]. In [
18], the authors established an expansion of a particular monogenic function in terms of generalized monogenic Bessel polynomials (GMBPs). Additionally, they proved that the GMBPs are solutions of second-order homogeneous differential equations.
As is the case in complex analyses, it is of great importance to examine when the product of special monogenic polynomials is effective in the theory of bases in Clifford analysis. It is not very surprising that the product of two effective bases does not maintain effectiveness, as shown in [
19], where the authors studied the effectiveness of the product of simple bases. Recently, in [
20], a generalization of the product base for functions with bounded radii of convergence was investigated. The inverse of an effective base does not need to be effective [
21]. Consequently, it is interesting to derive a new base of SMPs from given bases and examine how the convergence properties (region of effectiveness) of the derived base and the original bases are related. In alignment with this approach, researchers have studied the effectiveness of various constructed bases of SMPs, such as the inverse base [
21], Hadamard product base [
22], Bernoulli and Euler bases [
23], general Bessel base [
18], and Chebyshev base [
24]. Numerous results concerning the polynomial bases in one complex variable were generalized to the Clifford context [
16,
25]. The notion of the mode of increase of special monogenic functions was initially introduced in [
13]. In [
26], the authors determined the order and type of the coefficients in the Taylor expansion of entire axially monogenic functions. Related contributions to the investigation of the order of bases can be found in [
27,
28].
Motivated by the previous discussion, this paper defines a new base of polynomials: the equivalent base in the Clifford setting in the sense of Fréchet modules. After constructing this base in terms of three constituents (the factors), we characterize the convergence properties of the equivalent base in closed balls, open balls, at the origin, and for all entire SMFs by considering specific types of constituent bases, such as simple monic bases, simple bases, and nonsimple bases, with some restrictions on the coefficients. Furthermore, knowing the orders of the constituent bases, the upper and lower bounds of the equivalent base are assessed, and two examples demonstrating the attainability of these bounds are provided. We establish the  property of the equivalent base of SMPs.
The structure of the paper is organized as follows. 
Section 2 provides the essential definitions and results on Clifford algebra and SMPs in Fréchet modules. The concept of equivalent bases is defined and constructed in 
Section 3. 
Section 4 details the effectiveness properties of the equivalent base. We study the effectiveness when the constituent bases are simple monic bases, simple bases with normalizing conditions, nonsimple bases with restrictions on the degree of the bases, or algebraic bases. The upper and lower bounds of the order of the equivalent base are determined and proved attainable in 
Section 5. 
Section 6 deals with the 
 property of the equivalent base of SMPs in open balls. We conclude the paper by summarizing the results and suggesting open problems for further study.
  2. Preliminaries
This section collects several notations and results for Clifford analyses and functional analyses, which are essential throughout the paper. More details can be found in [
13,
15,
29] and the references therein.
The real Clifford algebra 
 is a real algebra of dimension 
, which is freely generated by the orthogonal basis 
 in 
 according to the non-commutativity property 
, where 
 for 
 (for details on the main concepts of 
, see [
30]). The space 
 is embedded in 
. Let 
; then, 
 refers to the real part of 
x, which represents the 
 component of 
x and 
. The conjugate of 
x is 
, where 
 and 
 for 
. The relationship 
 holds for all 
. Note that 
 is equipped with the Euclidean norm 
. As 
 is isomorphic to 
, we have, for any 
, 
 and 
 if 
 or 
, where 
 and 
.
An 
-valued function 
f is called left (resp. right)-monogenic in an open set 
 if it satisfies 
 (resp. 
) in 
 where
      
      is the generalized Cauchy–Riemann operator. Furthermore, a polynomial 
 is specially monogenic if and only if 
 (so 
 is monogenic) and there exists 
, for which
      
Definition 1.  Suppose that Ω is a connected open subset of  containing 0 and f is monogenic in Ω. Then, f is called special monogenic in Ω if and only if its Taylor series near zero (which exists) has the form  for certain SMPs, specifically  and .
 The space of all SMPs denoted by 
 is the right 
 module defined by
      
      where 
 was defined by Abul-Ez and Constales [
13] in the form
      
      where for 
, 
 is the Pochhamer symbol. Observe that 
 is identified with a subset of 
.
Let 
 be a homogeneous SMP of degree 
n in 
x and 
 where 
 is a Clifford constant (see [
13]). Consequently, we obtain
      
Now, we state the definition of a Fréchet module (F-module) as follows.
Definition 2.  An F-module E oversatisfies the following properties:
- (i) 
 E is a Hausdorff space,
- (ii) 
 E is a topology induced by a countable set of a proper system of semi-norms  such that . This implies that  is open if and only if for all , there exists  such that 
- (iii) 
 E is complete with respect to a countable set of a proper system of semi-norms.
 Definition 3.  A sequence  in an F-module E converges to f in E if and only iffor all .  Remark 1.  In the following Table 1, each indicated space represents an F-module depending on the countable set of a proper system of associated semi-norms.  Definition 4.  A sequence  of an F-module E is said to form a base if  admits a right -unique representation of the form The Clifford matrix  is the operator’s matrix of the base . The base  can be written as follows: The Clifford matrix  is called the coefficient matrix of the base . According to [13], the set  will be a base if and only ifwhere I denotes the unit matrix.  Let 
 be any SMF of an F-module 
E. Substituting for 
 from (
2), we obtain the basic series
      
      where
      
Remark 2.  Representation (5) is the most important series in Clifford analysis because, as we shall see, their sums are SMFs, and every SMF can be represented by basic series. Basic series generalize Taylor series, where  in (5) can be Legendre, Laguerre, Chebychev, Hermite, Bessel, Bernoulli, or Euler polynomials [18,23].  Definition 5.  A base  is effective for an F-module E if the basic series (5) converges normally to every element .  Applying Definition 5, we can take the F-module E to be the space . Thus, the base  will be effective for  if the basic series converges normally to every SMF  that is specially monogenic in . A similar inclusion criteria can be applied for the spaces  and . When R tends to infinity in , the definition of effectiveness yields effectiveness for , which means that the basic series converges normally to every complete SMF  on the whole space . Moreover, when R tends to zero in , the definition of effectiveness yields effectiveness for , which means that the basic series converges normally to every SMF  that is specially monogenic there.
Results concerning the study of the effectiveness properties of bases in the F-modules 
E were presented in [
15]. We can write
      
      where
      
Then, the convergence properties of a base are totally determined by the value of
      
      where 
 is the Cannon sum and 
 is the Cannon function.
Theorem 1.  A necessary and sufficient condition for a baseto be
- 1.
 Effective for  is that ;
- 2.
 Effective for  is that ;
- 3.
 Effective for  is that ;
- 4.
 Effective for  is that ;
- 5.
 Effective for  is that .
 The Cauchy inequality for the base in (
3) is defined as [
15]
      
Definition 6.  When  is a base of polynomials, then Representation (2) is finite. If the number of non-zero terms  in (2) is such thatthe base  is called a Cannon base of polynomials. Moreover, when  then the base  is said to be a general base.  Definition 7.  A base  of polynomials is called a simple base if the polynomial  is of degree n. A simple base is called a simple monic base if 
 Definition 8.  The order of a base  in a Clifford setting was defined in [13,14] by  Determining the order of a base allows us to realize that if the base  has a finite order, , then it represents every complete SMF of an order less than  in any finite ball.
  6. The  Property of the Equivalent Base of SMPs
In this section, we construct the 
 property of equivalent bases of special monogenic polynomials in the open ball 
. First, we recall the definition of the 
 property as given in [
27], as follows.
Definition 10.  Let . Then, a base  has the  property in an open ball  if it represents all entire special monogenic functions of an order less than ρ in 
 Let
      
 The restriction placed on the base 
 of SMPs to satisfy the 
 property in the open ball 
 [
27] is stated as follows.
Theorem 9.  Let  be a base of special monogenic polynomials and suppose that the function  is an entire SMF of an order less than ρ. Then, the necessary and sufficient conditions for the base  to have the property  in  are 
 In this regard, we state and prove the following result.
Theorem 10.  If the simple monic bases  have a  property in  where  and , then the equivalent base  will have a  property in .
 Proof.  Since the bases 
 have the 
 property where 
 in 
 for 
, then, according to Theorem 9, we have
        
Since 
, then
        
Since the bases 
 are simple monic, it follows that
        
        and
        
Using (
58)–(
60), and Cauchy’s inequality, the Cannon sum for the equivalent base 
 is
        
Taking the upper limit, we obtain the function 
 for the equivalent base 
 in the form
        
        which leads to the fact that the equivalent base has the property 
 in 
, as required.    □
 Example 3.  Consider the three simple monic bases of polynomials  where  as follows: It is easily seen that , , and .
Therefore, the bases  have a  property,  property, and  property in  for  and  respectively.
Now, we construct the equivalent base as follows: Hence,i.e., the equivalent base has a  property in .    7. Conclusions and Future Work
This paper employs the definition of the product base of SMPs to construct a new base called the equivalent base in Fréchet modules in the Clifford setting. The convergence properties of the derived base were treated for different classes of bases. Within this study, we indicate which type of restrictions we should consider on the coefficients to justify the effectiveness properties of the equivalent base in various regions of convergence, such as open balls, closed balls, at the origin, and for all entire SMFs. Furthermore, given the orders of the constituent bases, we determined the lower and upper bounds of the order of the equivalent base. Moreover, the  property of the equivalent base is determined in the case of simple monic bases, which are promising for characterizing this property for more general bases.
Looking back to our constructed base,
      
      and by taking 
, a similar base 
 can be considered a special case of the equivalent base 
, reflecting that the results in the current study generalize the corresponding results in [
33].
This study encourages the provision of answers to other open problems regarding the representations of entire functions in several complex variables. We believe that the results in this study are likely to hold in the setting of several complex matrices in different convergence regions, such as hyperspherical, polycylindrical, and hyperelliptical regions.
Recently, the authors of [
18] proved that the Bessel special monogenic polynomials are effective for the space 
, and the authors of [
24] proved that the Chebychey polynomials is effective for the space 
. The Bernoulli special monogenic polynomials are proved to have an order of 1 and a type 
, while the Euler special monogenic polynomials have an order of 1 and a type 
 (see [
23]). Demonstrating how the convergence properties involve the effectiveness, order, and type of the different constructed bases we have mentioned above, as well as the corresponding aspects of the original bases and, in particular, the well-known special polynomial bases, is one of the most challenging subjects to explore. The proposed methodological weakness is that the work lacks practical application. However, in upcoming research, it will be interesting to study concrete applications of mathematical physics problems, such as Legendre polynomials and their relation to solutions of the Dirac equation and its other formulation as the spinor functions, as well as in curved space–time, which has many applications in quantum mechanics.