Next Article in Journal
In Situ Trace Element and Sulfur Isotope Composition of Pyrite from the Beiwagou Pb-Zn Deposit, Liaodong Peninsula, Northeast China: Implications for Ore Genesis
Previous Article in Journal
Tracing the Early Crustal Evolution of the North China Craton: New Constraints from the Geochronology and Hf Isotopes of Fuchsite Quartzite in the Lulong Area, Eastern Hebei Province
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Paleo-Environment Induced Full-Scale Pore Variation in the Low Matured Shale: A Case Study of the Third Member of the Jiufotang Formation at the Lujiapu Rift Basin, Northeast China

1
Key Laboratory of Continental Shale Hydrocarbon Accumulation and Efficient Development, Ministry of Education, Northeast Petroleum University, Daqing 163318, China
2
PetroChina Liaohe Oilfield Company, Panjin 124000, China
*
Author to whom correspondence should be addressed.
Minerals 2023, 13(9), 1175; https://doi.org/10.3390/min13091175
Submission received: 26 July 2023 / Revised: 2 September 2023 / Accepted: 3 September 2023 / Published: 7 September 2023

Abstract

Shale in the third member of the Jiufotang Formation at the Lujiapu Rift Basin is a new potential target for shale oil exploration and has rarely been studied before. In order to study pore structure and its controlling factors, shale compositions are mainly analyzed by X-ray Diffraction (XRD), and the characterization of full-scale pore structures is studied by the field-emission scanning electron microscope (FE-SEM), low-temperature N2 adsorption, and high-pressure mercury intrusion porosimetry (high-pressure MIP). According to composition and micro-texture, shale samples in the third member of the Jiufotang Formation are classified into three types: laminated organic matter-lean shale (TOC < 2%), unlaminated organic matter-intermediate shale (2% < TOC < 4%) and laminated organic matter-rich shale (TOC > 4%). Most shale samples are dominated by interparticle pores, with many of them filled by diagenetic minerals. All the shale samples are most developed in mesopores, whose development is mainly controlled by quartz content. And macropores with a diameter of 10,000 nm~100,000 nm are the secondary developed pores, which are influenced by both the paleoenvironment and diagenesis (especially clay transformation). Full-scale pore variations in laminated organic matter-lean shale, unlaminated organic matter-intermediate shale, and laminated organic matter-rich shale are ultimately related to their paleoenvironments.
Keywords: full-scale pores; quantitative characterization; low matured shale; controlling factors; paleo-environment full-scale pores; quantitative characterization; low matured shale; controlling factors; paleo-environment

Share and Cite

MDPI and ACS Style

Li, H.; Guo, L.; Liu, X.; Fu, X.; Cheng, L.; Jia, R. Paleo-Environment Induced Full-Scale Pore Variation in the Low Matured Shale: A Case Study of the Third Member of the Jiufotang Formation at the Lujiapu Rift Basin, Northeast China. Minerals 2023, 13, 1175. https://doi.org/10.3390/min13091175

AMA Style

Li H, Guo L, Liu X, Fu X, Cheng L, Jia R. Paleo-Environment Induced Full-Scale Pore Variation in the Low Matured Shale: A Case Study of the Third Member of the Jiufotang Formation at the Lujiapu Rift Basin, Northeast China. Minerals. 2023; 13(9):1175. https://doi.org/10.3390/min13091175

Chicago/Turabian Style

Li, Hongxia, Lei Guo, Xingzhou Liu, Xiaofei Fu, Lijuan Cheng, and Ru Jia. 2023. "Paleo-Environment Induced Full-Scale Pore Variation in the Low Matured Shale: A Case Study of the Third Member of the Jiufotang Formation at the Lujiapu Rift Basin, Northeast China" Minerals 13, no. 9: 1175. https://doi.org/10.3390/min13091175

APA Style

Li, H., Guo, L., Liu, X., Fu, X., Cheng, L., & Jia, R. (2023). Paleo-Environment Induced Full-Scale Pore Variation in the Low Matured Shale: A Case Study of the Third Member of the Jiufotang Formation at the Lujiapu Rift Basin, Northeast China. Minerals, 13(9), 1175. https://doi.org/10.3390/min13091175

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop