Article Versions Notes
| Action | Date | Notes | Link |
|---|---|---|---|
| article pdf uploaded. | 13 April 2026 11:41 CEST | Version of Record | https://www.mdpi.com/2073-4360/18/8/949/pdf |
You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.
All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess.
Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.
Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.
Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.
Original Submission Date Received: .
| Action | Date | Notes | Link |
|---|---|---|---|
| article pdf uploaded. | 13 April 2026 11:41 CEST | Version of Record | https://www.mdpi.com/2073-4360/18/8/949/pdf |
Demirtas, B.; Sevim, C.; Demirbas, M.D. Composition-Dependent Mechanical and Thermal Behavior of TPU-Modified PLA and ABS Filaments for FDM Applications. Polymers 2026, 18, 949. https://doi.org/10.3390/polym18080949
Demirtas B, Sevim C, Demirbas MD. Composition-Dependent Mechanical and Thermal Behavior of TPU-Modified PLA and ABS Filaments for FDM Applications. Polymers. 2026; 18(8):949. https://doi.org/10.3390/polym18080949
Chicago/Turabian StyleDemirtas, Burak, Caglar Sevim, and Munise Didem Demirbas. 2026. "Composition-Dependent Mechanical and Thermal Behavior of TPU-Modified PLA and ABS Filaments for FDM Applications" Polymers 18, no. 8: 949. https://doi.org/10.3390/polym18080949
APA StyleDemirtas, B., Sevim, C., & Demirbas, M. D. (2026). Composition-Dependent Mechanical and Thermal Behavior of TPU-Modified PLA and ABS Filaments for FDM Applications. Polymers, 18(8), 949. https://doi.org/10.3390/polym18080949