Next Article in Journal
Selection of 3D-Printing Optimal Parameters via MCDM for Maximizing the Thermomechanical Response of TPU and PEEK
Previous Article in Journal
Programming Failure Mode Transitions in Polyurea-Reinforced 3D-Printed ABS and PA-GF Cellular Metamaterial Composites
Previous Article in Special Issue
Development of Alternative Screw Concepts for Rubber Extrusion Based on Simulative and Experimental Methods
 
 
Article

Article Versions Notes

Polymers 2026, 18(12), 1467; https://doi.org/10.3390/polym18121467
Action Date Notes Link
article html file updated 11 June 2026 15:22 CEST Original file https://www.mdpi.com/2073-4360/18/12/1467/html
article pdf uploaded. 11 June 2026 15:20 CEST Version of Record https://www.mdpi.com/2073-4360/18/12/1467/pdf
article xml uploaded. 11 June 2026 15:20 CEST Update https://www.mdpi.com/2073-4360/18/12/1467/xml
article xml file uploaded 11 June 2026 15:20 CEST Original file -
Back to TopTop