Next Article in Journal
Cationized Hemp Fiber to Improve the Interfacial Adhesion in PLA Composite
Next Article in Special Issue
Investigation of the Effects of Different Curing Methods on the Adhesion Strength of Single-Lap Joints Produced by Bonding 3D-Printed ABS and PLA Plates with Different Epoxy Adhesives
Previous Article in Journal
Using Polymeric Carbon Nitride/ZrO2 Nanocomposite for Low Salinity Water Flooding in Carbonate Porous Media at Real Reservoir Conditions
Previous Article in Special Issue
Examining the Flexural Behavior of Thermoformed 3D-Printed Wrist–Hand Orthoses: Role of Material, Infill Density, and Wear Conditions
 
 

Order Article Reprints

Journal: Polymers, 2025
Volume: 17
Number: 651

Article: Investigation of the Influence of Manufacturing on Filament Production and Its Impact on Additive Manufactured Structures
Authors: by Mohamed Refat, Robert Maertens, Patrick Weiss, Frank Henning, Volker Schulze and Wilfried V. Liebig
Link: https://www.mdpi.com/2073-4360/17/5/651

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop