Next Article in Journal
Development and Application of a Cooling Rate Dependent PVT Model for Injection Molding Simulation of Semi Crystalline Thermoplastics
Next Article in Special Issue
From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication
Previous Article in Journal
A Self-Oscillator Based on Liquid Crystal Elastomer Fiber Under Constant Voltage
Previous Article in Special Issue
Surface Treatment of Additively Manufactured Polyetheretherketone (PEEK) by Centrifugal Disc Finishing Process: Identification of the Key Parameters
 
 

Order Article Reprints

Journal: Polymers, 2024
Volume: 16
Number: 3193

Article: Effect of the Infill Density on 3D-Printed Geometrically Graded Impact Attenuators
Authors: by Mateus Q. dos Reis, Ricardo J. C. Carbas, Eduardo A. S. Marques and Lucas F. M. da Silva
Link: https://www.mdpi.com/2073-4360/16/22/3193

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop