Next Article in Journal
Development and Application of a Cooling Rate Dependent PVT Model for Injection Molding Simulation of Semi Crystalline Thermoplastics
Next Article in Special Issue
From Soft Lithography to 3D Printing: Current Status and Future of Microfluidic Device Fabrication
Previous Article in Journal
A Self-Oscillator Based on Liquid Crystal Elastomer Fiber Under Constant Voltage
Previous Article in Special Issue
Surface Treatment of Additively Manufactured Polyetheretherketone (PEEK) by Centrifugal Disc Finishing Process: Identification of the Key Parameters
 
 
Article

Article Versions Notes

Polymers 2024, 16(22), 3193; https://doi.org/10.3390/polym16223193
Action Date Notes Link
article html file updated 29 June 2025 22:09 CEST Update https://www.mdpi.com/2073-4360/16/22/3193/html
article html file updated 17 November 2024 09:14 CET Original file -
article pdf uploaded. 17 November 2024 09:11 CET Version of Record https://www.mdpi.com/2073-4360/16/22/3193/pdf
article xml uploaded. 17 November 2024 09:11 CET Update https://www.mdpi.com/2073-4360/16/22/3193/xml
article xml file uploaded 17 November 2024 09:11 CET Original file -
Back to TopTop