Next Article in Journal
Performances of Polymer-Dispersed Liquid Crystal Films for Smart Glass Applications
Next Article in Special Issue
Properties of Heat-Treated Wood Fiber–Polylactic Acid Composite Filaments and 3D-Printed Parts Using Fused Filament Fabrication
Previous Article in Journal
End-Of-Use Fly Ash as an Effective Reinforcing Filler in Green Polymer Composites
Previous Article in Special Issue
Analysis of the Effect of the Surface Inclination Angle on the Roughness of Polymeric Parts Obtained with Fused Filament Fabrication Technology
 
 

Order Article Reprints

Journal: Polymers, 2023
Volume: 15
Number: 3419

Article: Optimization of 3D Printing Parameters for Enhanced Surface Quality and Wear Resistance
Authors: by Alexandra Ileana Portoacă, Razvan George Ripeanu, Alin Diniță and Maria Tănase
Link: https://www.mdpi.com/2073-4360/15/16/3419

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop