Skip to Content
You are currently on the new version of our website. Access the old version .
MDPIMDPI
CatalystsCatalysts
PDF
  • Editorial
  • Open Access

2 June 2022

Immobilized Non-Precious Electrocatalysts for Advanced Energy Devices

Chemical Engineering Department, Minia University, Elminia 61519, Egypt
Catalysts2022, 12(6), 607;https://doi.org/10.3390/catal12060607
This article belongs to the Special Issue Immobilized Non-Precious Electrocatalysts for Advanced Energy Devices
Version Notes
Order Reprints
The expected near depletion of fossil fuels encourages both the research and industrial communities to focus their efforts to find effective and sustainable alternatives. Electrochemical devices, including fuel cells, batteries, supercapacitors, solar cells, etc., have been found to be the optimal life raft away from this dilemma. Aside from the potential for power generation from untraditional energy sources such as wastewater, electrochemical devices are highly recommended from an environmental point of view. The zero-emission of the exhaust gases greatly helps to solve one of the most dangerous problems currently facing the planet: the increasing climate temperature. Therefore, it would not be an exaggeration to claim that the development of electrochemical devices is considered an existential demand.
In the first era of these promised devices, precious metals such as platinum, palladium, and ruthenium were the main constituents in the manufacture of both cathodes and anodes. However, their high cost constrains the commercial application of these devices [1]. Compared to anodes, precious metal-based compounds as cathode materials were widely exploited. However, the thermodynamic potential of ORR (1.23 V vs. NHE at standard conditions) is so high that the Pt electrode cannot remain pure. Accordingly, the performance decreases due to the formation of PtO [2,3]. Consequently, non-precious metals must be used as electrodes in electrochemical devices not only for cost-decreasing reasons but also for the long-term use of these devices. In this regard, numerous non-precious electrodes have been introduced for different electrochemical devices including fuel cells [4,5,6], supercapacitors [7], batteries [8], and others [9,10,11,12].
Since most of the electrochemical reactions can be considered a combination of adsorption and chemical reaction, carbonaceous materials are widely invoked as supports for different functional materials. Specifically, carbon nanostructures including graphene, carbon nanotubes, and carbon nanofibers show a distinguished enhancement in electrocatalytic activity. Their large surface area and well-known high adsorption capacity improves both mass transfer and reaction(s) kinetics operations. Therefore, different techniques have been proposed for the immobilization of the functional materials on proper supports.
In this regard, this Special Issue entitled “Immobilized Non-Precious Electrocatalysts for Advanced Energy Devices” aims to collect innovative and high-quality research. Along with being a highly informative review article in the field of green hydrogen production, this issue contains nine articles introducing different functional non-precious materials immobilized on various supports. Moreover, the guest editor did his best to focus on popularly discussed topics to draw the maximum amount of attention from the researchers working in the advanced energy devices field. Consequently, a variety of interesting topics are covered in this issue including urea electrooxidation, dye sensitized solar cells, oxygen reduction reactions, and methanol & ethanol electrooxidation.
In summary, the current Special Issue covers cutting-edge techniques for addressing open problems about the use of non-precious metals in the most appealing energy devices and the immobilization of these functional materials on appropriate supports. Finally, the guest editor wishes to thank the editorial staff for their professional help as well as all the contributed authors for their outstanding scholarly contributions.

Conflicts of Interest

The author declares no conflict of interest.

References

  1. Xu, H.; Ci, S.; Ding, Y.; Wang, G.; Wen, Z.J. Recent advances in precious metal-free bifunctional catalysts for electrochemical conversion systems. J. Mater. Chem. A 2019, 7, 8006–8029. [Google Scholar] [CrossRef]
  2. Hoque, M.A.; Hassan, F.M.; Higgins, D.; Choi, J.Y.; Pritzker, M.; Knights, S.; Ye, S.; Chen, Z. Multigrain Platinum Nanowires Consisting of Oriented Nanoparticles Anchored on Sulfur-Doped Graphene as a Highly Active and Durable Oxygen Reduction Electrocatalyst. Adv. Mater. 2015, 27, 1229–1234. [Google Scholar] [CrossRef] [PubMed]
  3. Hoare, J.P. Electrochemistry of Oxygen; Wiley: New York, NY, USA, 1968. [Google Scholar]
  4. Kiani, M.; Tian, X.Q.; Zhang, W. Non-precious metal electrocatalysts design for oxygen reduction reaction in polymer electrolyte membrane fuel cells: Recent advances, challenges and future perspectives. Coord. Chem. Rev. 2021, 441, 213954. [Google Scholar] [CrossRef]
  5. Ren, X.; Liu, B.; Liang, X.; Wang, Y.; Lv, Q.; Liu, A. Review-Current Progress of Non-Precious Metal for ORR Based Electrocatalysts Used for Fuel Cells. J. Electrochem. Soc. 2021, 168, 044521. [Google Scholar] [CrossRef]
  6. Barakat, N.A.; El-Deen, A.G.; Ghouri, Z.K.; Al-Meer, S. Stable N-doped & FeNi-decorated graphene non-precious electrocatalyst for Oxygen Reduction Reaction in Acid Medium. Sci. Rep. 2018, 8, 3757. [Google Scholar] [PubMed]
  7. Sawant, S.Y.; Han, T.H.; Ansari, S.A.; Shim, J.H.; Nguyen, A.T.N.; Shim, J.-J.; Cho, M.H. A metal-free and non-precious multifunctional 3D carbon foam for high-energy density supercapacitors and enhanced power generation in microbial fuel cells. J. Ind. Eng. Chem. 2018, 60, 431–440. [Google Scholar] [CrossRef]
  8. Cao, R.; Lee, J.S.; Liu, M.; Cho, J. Recent Progress in Non-Precious Catalysts for Metal-Air Batteries. Adv. Energy Mater. 2012, 2, 816–829. [Google Scholar] [CrossRef]
  9. Jiang, W.-J.; Tang, T.; Zhang, Y.; Hu, J.-S. Synergistic Modulation of Non-Precious-Metal Electrocatalysts for Advanced Water Splitting. Acc. Chem. Res. 2020, 53, 1111–1123. [Google Scholar] [CrossRef] [PubMed]
  10. Chen, Y.; Zheng, Y.; Yue, X.; Huang, S. Hydrogen evolution reaction in full pH range on nickel doped tungsten carbide nanocubes as efficient and durable non-precious metal electrocatalysts. Int. J. Hydrogen Energ. 2020, 45, 8695–8702. [Google Scholar] [CrossRef]
  11. Barakat, N.A.M.; Abdelkareem, M.A.; Abdelghani, E.A.M. Influence of Sn Content, Nanostructural Morphology, and Synthesis Temperature on the Electrochemical Active Area of Ni-Sn/C Nanocomposite: Verification of Methanol and Urea Electrooxidation. Catalysts 2019, 9, 330. [Google Scholar] [CrossRef] [Green Version]
  12. El-Eskandarany, M.S.; Banyan, M.; Al-Ajmi, F. Synergistic Effect of New ZrNi5/Nb2O5 Catalytic Agent on Storage Behavior of Nanocrystalline MgH2 Powders. Catalysts 2019, 9, 306. [Google Scholar] [CrossRef] [Green Version]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Article Metrics

Citations

Article Access Statistics

Journal Statistics
Multiple requests from the same IP address are counted as one view.
Ni/CeO2 Catalyst Prepared via Microimpinging Stream Reactor with High Catalytic Performance for CO2 Dry Reforming Methane
Previous
Electro-Catalytic Properties of Palladium and Palladium Alloy Electro-Catalysts Supported on Carbon Nanofibers for Electro-Oxidation of Methanol and Ethanol in Alkaline Medium
Next