Next Article in Journal
Engineering of Removing Sacrificial Materials in 3D-Printed Microfluidics
Next Article in Special Issue
3D-Printed Biosensor Arrays for Medical Diagnostics
Previous Article in Journal
Development of a Sensor Network System with High Sampling Rate Based on Highly Accurate Simultaneous Synchronization of Clock and Data Acquisition and Experimental Verification
Previous Article in Special Issue
3D-Printed Capillary Circuits for Calibration-Free Viscosity Measurement of Newtonian and Non-Newtonian Fluids
 
 

Order Article Reprints

Journal: Micromachines, 2018
Volume: 9
Number: 326

Article: 3D Printed Microfluidic Features Using Dose Control in X, Y, and Z Dimensions
Authors: by Michael J. Beauchamp, Hua Gong, Adam T. Woolley and Gregory P. Nordin
Link: https://www.mdpi.com/2072-666X/9/7/326

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop