Next Article in Journal
Fabrication of 512-Channel Geometrical Passive Breakup Device for High-Throughput Microdroplet Production
Previous Article in Journal
A Disposable Pneumatic Microgripper for Cell Manipulation with Image-Based Force Sensing
Previous Article in Special Issue
Viscosity Estimation of a Suspension with Rigid Spheres in Circular Microchannels Using Particle Tracking Velocimetry
Open AccessEditorial

Editorial for the Special Issue on Micro/Nano Devices for Blood Analysis

by Susana O. Catarino 1,*, Graça Minas 1,* and Rui Lima 2,3,*
1
Center for MicroElectromechanical Systems (CMEMS-UMinho), University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal
2
CEFT, Faculdade de Engenharia da Universidade do Porto (FEUP), Rua Roberto Frias, 4200-465 Porto, Portugal
3
MEtRICs, Mechanical Engineering Department, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal
*
Authors to whom correspondence should be addressed.
Micromachines 2019, 10(10), 708; https://doi.org/10.3390/mi10100708
Received: 14 October 2019 / Accepted: 15 October 2019 / Published: 18 October 2019
(This article belongs to the Special Issue Micro/Nano Devices for Blood Analysis)
Note: In lieu of an abstract, this is an excerpt from the first page.

The development of microdevices for blood analysis is an interdisciplinary subject that demands an integration of several research fields such as biotechnology, medicine, chemistry, informatics, optics, electronics, mechanics, and micro/nanotechnologies [...] View Full-Text
MDPI and ACS Style

Catarino, S.O.; Minas, G.; Lima, R. Editorial for the Special Issue on Micro/Nano Devices for Blood Analysis. Micromachines 2019, 10, 708.

Show more citation formats Show less citations formats
Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Article Access Map by Country/Region

1
Back to TopTop