1 Introduction
Sustainable food security means enough food for everyone at present plus the ability to provide enough in the future. The global food security is in question today, with ever increasing food prices resulting from adverse climatic effects on agricultural production, rises in oil prices leading to increased running costs for farm tractors, increasing use of food items for other products and reduction of government spending on agriculture. The environmental sustainability has also become more elusive due to rapid industrialization, urbanization and population growth, without public realization about the effects of environmental pollution on agriculture. The economies of many countries of the world depends on agriculture that demands technological breakthroughs to lead to the required significant increase in the level of food production. Large stocks of food materials are stored up to meet exigencies. Importantly, some of the large stocks of food products might be infested; the prevention of these infestations could increase the cost of storage, though preventing the deterioration in the quality of the materials. The use of food materials for manufacturing of biofuel to meet the world energy need for industries and the transportation sector has resulted in diversion of food crops like guinea-corn, rice, maize and beans. With this, the question of food security for the increasing population has emerged. The problems of dwindling food availability and environmental sustainability will continue to aggravate because the total food production has remained constant over the last years with growing environmental and socio-economic challenges [
1]. The use of biofuel may encourage a war between food and fuel. Production of biofuel may lead to adecrease in the land available for food production, thereby creating scarcity of food. There is a greater need for farmers to have access to other crops with modern and eco-friendly technologies that will ensure food security and environmental sustainability.
In the past, maize was Africa’s most important food crop, however, maize production in Africa is risky due to unpredictable rainfall, and it is not financially feasible to depend on irrigation. For this reason and perceived others, Cassava (Manihot esculenta, Crantz) became the most important food crop in Africa. Cassava as a food crop could play a vital role in the food security of the world because of its capacity to yield under marginal soil conditions and its tolerance to drought. The crop originated in South America, where its tubers have been used throughout the ages as a basic food; from there it spread to regions of the world. It is now the most widely cultivated crop in Africa and is grown by smallholder farmers, who depend on seasonal rainfall. Cassava as a food crop might help in sustaining food security: “It is Africa’s best kept secret”, but efficient mechanical handling, storage and processing technologies need experts’ attention.
Cassava is typically grown by small-scale farmers using traditional methods, and often on land that is not suitable for other crops. Cassava is propagated by cutting a mature stem into sections of approximately 15 centimeters and planting these prior to the wet season. These plantings require adequate moisture during the first two to three months, but are subsequently drought resistant. The roots are harvestable after six to 12 months and can be harvested any time in the following two years, thus providing farmers with a remarkable amount of flexibility. World production of cassava root was estimated to be 184 million metric tons in 2002. The majority of production was in Africa, where 99.1 million metric tons were grown, while 51.5 million metric tons were grown in Asia, and 33.2 million metric tons in Latin America and the Caribbean. Nigeria has doubled the production of other major producers of cassava such as Thailand and Indonesia since 1990, and the country has surpassed Brazil as the world’s leading producer of cassava. The total area of cassava crop harvested in 2001 was 3.1 million hectare with an average yield of about 11 t/ha. The rapid adoption of Tropical Manioc Selection (TMS) improved cassava varieties and the presence of the International Institute of Tropical Agriculture (IITA) in Ibadan has assisted Nigerian’s position as a leader in cassava production. However, based on the statistics from the FAO of the United Nations, Thailand is the largest exporting country of dried Cassava, providing 77% of world export in 2005. The second largest exporting country is Vietnam, with 13.6%, followed by Indonesia with 5.8% and Costa Rica with 2.1% [
2].
Cassava food items have not been paid proper attention worldwide; however, a difficulty faced in their consumption is that the process for making them edible depends on the variety. Cassava varieties are often categorized as either “sweet” or “bitter”, signifying the absence or presence of toxic levels of cyanogenic glucosides. Cassava provides the livelihood for farmers and countless processors and traders as a famine reserve crop, cash crop for urban consumption, industrial raw material, foreign exchange earner, and livestock feed. Cassava production exhibits high levels of variability and cyclical gluts, due mainly to the inability of markets to absorb supplies in some countries, resulting in a decline in the price of harvested and processed roots and subsequently reduced production levels in succeeding years before picking up again. Such factors identified by IITA-Ibadan have caused price instability in Nigeria over the years, which significantly increases the income risk to producers.
The processed flour from cassava is used throughout the Caribbean. The traditional method used in West Africa is to peel the roots and put them into water for three days to ferment. The roots are then dried or cooked. In several West African countries, including Nigeria, Ghana, Benin, Togo, Cote d’Ivoire, and Burkina Faso, the roots are usually grated and lightly fried in palm oil to preserve them. The result is a foodstuff called ‘Gari’. Fermentation is also used in other places such as Indonesia. South American Amerindians relied on cassava and generally understand the processing methods.
Cassava roots are very rich in starch, and contain significant amounts of calcium (50 mg/100g), phosphorus (40 mg/100g), and vitamin C (25 mg/100g). The quality of protein is relatively good [
2]. According to Katz and Weaver in 2003, cassava roots are cooked in various ways in order to turn them to food. The soft-boiled root has a delicate flavor and can replace boiled potatoes in many uses: as an accompaniment for meat dishes, or made into purées, dumplings, soups, stews, gravies,
etc. Deep frying (after boiling or steaming) can replace fried potatoes, with a distinctive flavor. Cassava flour, can also replace wheat flour. It is also used in cereals; several tribes in South America have used cassava extensively in this way. Cassava can also be used to make alcoholic beverages. In many countries, significant research has begun to evaluate the use of cassava as an ethanol. Among other industrial applications, dried tapioca are used in China as a raw material for the production of consumable alcohol and emerging non-grain feedstock of ethanol fuel, which is a form of renewable energy to substitute petrol (gasoline). In South America, cassava is used as bread, as a roasted, granular meal (farinha, fariña), as a beer (chicha), a drink (manicuera), as a vegetable (boiled or boiled and fried). Farinha is part of a number of traditional dishes. Chicha is a mildly alcoholic beer made from both sweet and bitter cassava. Cassava is very popular in Bolivia, with the name of
yuca, and is consumed in a variety of dishes. The capacity of cassava to be stored for a long time makes it an ideal and cheap reserve of nutrients. Recently, more restaurants, hotels, and also the general population are including cassava into their original recipes and everyday meals as a substitute for potato and bread.
Cassava is heavily featured in the cuisine of Brazil, In the Colombian northern coastal region; it is used mainly in the preparation of soups. In the Caribbean region of Colombia, it is also eaten roasted, fried, or boiled with soft homemade cheese or cream cheese and mainly to accompany fish dishes. Cassava is widely used by the Creole, Indian, Javanese, and indigenous population.
The Chinese name for cassava is Mushu, literally meaning “tree potato”. In the subtropical region of southern China, cassava is the fifth largest crop in terms of production. In sub-Saharan Africa, cassava is the most important food crop. In the humid and sub-humid areas of tropical Africa, cassava is either a primary staple food or a secondary co-staple.
Promoting cassava worldwide as food for both man and animal would not be difficult, but the modern harvesting and processing has some engineering constraints, causing technical, resource, socioeconomic and organizational challenges [
3]. These constraints are presented here for the attention of researchers and other experts around the world. The objective of this review is to present cassava production problems that have been encountered and to show some efforts being made in Nigeria toward its mechanization. Other countries of the world have equally tried to solve their own cassava production problems, but the IITA discovered that High Quality Cassava Flour (HQCF) comes with so much challenges that donors and scientists need to assist. HQCF has the potential to solve the world food crisis, but better harvesting and processing equipment solutions are needed to solve the production problems. From cassava, there is potential to generate one crop with multiple economic benefits, capable of providing a sustainable world food security with improved post harvest handling and processing technology.
2. Current Cassava Harvest—Processing Practice in Nigeria and Its Constraints
There is a wide range of cassava products produced in Nigeria, mostly for direct human consumption after harvesting. This is because the emphasis of the promotion of cassava has been on its use as a food. The use of the crop as a basic raw material for industrial purposes would improve industry in Nigeria. The new focus of market diversification, such as the use of cassava in livestock feed, means that more maize and other feed materials used in the past can now be available for other uses. Diverse uses of cassava flour food products such as its glucose for pharmaceuticals products as well as food supplements, and to make alcohol and other beverages, would make farmers smile all the way to the bank.
There is a weak link between industrial processors and producers of cassava products that must be strengthened. The Federal government of Nigeria’s mandate to include 10% HQCF flour in all products of wheat flour for bread-making has led to farmers and food processors demanding equipment and machinery to increase production. The Raw Materials and Research Development Council (RMRDC) of the Federal Ministry of Science and Technology has organized stakeholders’ workshop on cassava research and development with discussions centered on increasing technology for cassava production, processing and export. The need to develop adaptable machinery for cassava production and processing has become increasingly important [
4].
2.1. Harvesting
The most difficult operation in cassava production is cassava harvesting [
5]. Cassava is harvested by hand by raising the lower part of stem and pulling the roots out of the ground, then removing them from the base of the plant. The upper parts of the stems with the leaves are plucked off before harvest. Cassava harvesting processes include cutting of the stem about 0.3 m above the soil surface and collecting the stems as planting material. The loosening of the soil at the cassava root zone is followed by lifting the cassava root system out of the soil. Separating the root system from adhering soil could be done with special tools, before collecting tubers, loading them on to transport vehicles and transporting them as required. Existing manual harvesting techniques leads to drudgery, wastage, and also consumes a lot of time and farm labor, which is scarce and costly. Cassava harvesting is still done manually in Nigeria. Manual harvesting of cassava does not fit well with the modern processing factories; which could lead to under-utilization of the operational capacities. Freshly harvested cassava roots are bulky and the shelf life rarely exceeds two days after harvesting due to enzymatic reactions.
The problems militating against the development of a mechanical harvester for cassava are:
The indeterminate shape and geometry of the tubers in the soil at the time of harvesting makes the design of digging blades difficult.
The depth of growth of the tubers in the soil. At the time of harvesting, there is need to dig the soil to depths of between 0.25 and 0.30 m and handling about 500 kg of soil to harvest one plant of cassava, at a planting density of 10,000 plants per hectare. At least 75 kW of tractor power per row is required to achieve this. The woody nature of the stem thereby impairs the movement of workers and machinery. .The tubers perish easily, especially when bruised or cut by harvesting blades. Desiccation of the soil during the dry season is detrimental to efficient harvesting of tubers. Yet tubers are harvested at any time of the year. The nature of the soil, especially in the forest areas, includes the presence of tree roots, stumps and rock outcrops. Small farm holdings and fragmentation of farmlands may not be able to afford the high power requirement of a harvester. Presently, there is no commercially available cassava harvester in Nigeria.
2.2. Processing
Roots deteriorate within three to four days after harvesting and thus are either consumed immediately or processed into a form with better storage qualities. The bulkiness and high perishability of harvested roots make immediate processing of the roots necessary. The simple processing methods available, including pounding, grating or chipping, to convert the cassava roots to acceptable products are too slow. The operations involved in cassava processing depend on the end product desired. In general, the processing stages in cassava include peeling, washing, grating, chipping, drying, dewatering/fermentation, pulverization and sieving/sifting and frying. Five distinct operations are involved in producing gari, and these include peeling, grating, fermentation/dewatering or pressing, sieving (or sifting) and frying. Peeling is the first operation performed after the cassava tubers have been harvested. It involves peeling off the cassava tuber outer skin with a knive, mostly carried out by the women and children. The next stage is grating: this is done with graters, but in older times cassava tubers were grated on a piece of galvanized metal sheet, punched with about 3 mm diameter nails leaving a raised jagged flange on the underside. The grating surface was fixed on a flat wooden frame. This method is tedious and time consuming and endangers the operator’s fingers. Dewatering of cassava mash is the second and most difficult operation and occurs after the peeling operation, fermentation and pressing (de-watering) are done in one operation. The grated mash is packed inside baskets, jute bags or perforated plastic sacks and left to ferment for one-to-four days. The duration of this fermentation affects the color, taste and texture of the gari. After fermentation is complete, the mash is pressed to reduce the water content. The traditional method of dewatering grated cassava mash involves tying and twisting the neck of a hessian sack over which heavy stones are placed for one or two days. The fermentation and pressing takes a long period to accomplish. At the village level, gari is fried in shallow cast-iron pans after sieving with raffia mat. The sieved cassava mash is spread thinly in the pan in 2–3 kg batches. A piece of calabash is often used in stirring the gari on the hot surface of the pan to prevent it burning until the frying is completed. Gari frying is a complex procedure, which depends on the skill of the operator. The inability to control the temperature of frying; exposure of the operator to heat and smoke from the fire; and steam from the wet cassava mash, have been major setbacks in the traditional frying of gari. The fried gari is finally spread onto mat or polythene to cool before packaging.
Since processing adds value to the cassava and also extends the shelf life, the present cassava processing methods are not good enough, and are highly labor-intensive and expensive. Manual processing requires a minimum of four person-days to peel and wash, and 23 person-days to chip one tonne of fresh cassava roots, translating to approximately US$65 to prepare a tonne of flour. In contrast, the cost of processing cassava into flour could be approximately US$16/t with mechanized processing [
4].
Constraints
Constraints to cassava processing include the absence of efficient equipment; appropriate processing technologies, machines, and tools. These are not easily affordable and sometimes unavailable at the farm level. The currently available ones were merely fabricated without adequate engineering research. Presently, the equipment available is the grater, dryer, and dewatering machines. Some success was recorded with graters and some dewatering tools. The dewatering tools work in batches while factories need a continuously-working machine for better production. Almost all the processing of cassava requires the roots to be peeled at one stage or another, and no efficient peeler is on the market. One of the greatest constraints to cassava processing is drying, which takes up to four days to complete when using sunlight; the available dryers are expensive beyond the famers’ means. Drying is a key process for making virtually all cassava products, however, the major cassava producing zones are also those with relatively more rain and a longer rainfall period. Solar radiation is relatively low, clearly justifying the need to use modern dryers for cassava commercialization in Nigeria, which are expensive.
Making cassava production competitive—both at the domestic levevl and for export to world markets—requires wide research and investments into processing machine designs and development, among others. Improved processing, storage and packaging technologies to extend shelf life will go a long way toward helping the world to maintain food security; this would contribute to increasing cassava root availability and reliability, which can provide self sufficiency and also allow export to areas of the world where food is not available [
5]