1. Introduction
The energy crisis resulting from the rapid depletion of fossil resources has raised public awareness of the need for environmental conservation. Thanks to the united efforts of scientists, significant progress has been accomplished during the past ten years. Distributed renewable energy sources (RESs) are integrated into the electrical grid to meet the energy demand [
1], and these distributed generation (DG) systems have made considerable use of RESs and electric vehicle charging stations (EVCSs) [
2]. The idea of multi-objective techno-economic optimization was put forward in [
3] as a way to plan when to charge and discharge electric vehicles. For the first time, frequency regulation was provided while simultaneously modeling and optimizing end-user energy costs, battery degradation, grid interactions, and CO
2 emissions in the context of home microgrids. However, to increase reliability, optimize renewable energy sources, and lower overall costs, appropriate energy management and operation are necessary, along with an appropriate optimization technique based on techno-economic viewpoints.
In [
4], the authors suggested a versatile multi-objective optimization method that considers the technological, financial, and environmental aspects while assessing and implementing V2G and grid-to-vehicle technologies. In addition, plug-in electric vehicle (PEV) users’ driving habits, charging and discharging habits, and battery life cycles are considered. The firefly algorithm is applied inside a stochastic optimization framework to run simulations on a modified IEEE 69-bus radial distribution test system. The goal is to minimize two objective functions: CO
2 emissions and operational costs. The framework considers renewable generation, load usage, and the charging/discharging time of PEVs as ambiguous variables. The work in [
5] offered hybrid renewable energy systems combined with mobile hydrogen vehicle storage and stationary batteries for a zero-energy community comprising office, residential, and academic buildings based on real-world energy consumption data and simulations. A time-of-use grid penalty cost model was presented to achieve electricity grid economy and flexibility, which evaluates grid export and import during on-peak and off-peak times. In the coupled platform of TRNSYS and jEplus + EA, multi-objective optimizations are carried out to size zero-energy buildings and the community while considering the self-consumption of renewable energy, on-site load coverage, and grid penalty cost. Methods for incorporating hydrogen energy technology into hybrid energy systems, focusing on hydrogen fuel cell power generation, were examined in [
6]. Energy storage integration, sizing techniques, energy flow control, and the software implementation and optimization methods that go along with them were covered. Published case studies seldom address issues beyond technical ones. The authors talked about this fact in the context of accessible software packages. To meet the design objectives for the energy system, a four-dimensional multi-objective metaheuristic function was suggested, with weights assigned to environmental, economic, socio-political, and technical aspects.
Researchers in [
7] looked into how responsive loads and the stochastic behavior of EVs (including their departure/arrival times and charge levels) could be used as demand-side management tools to improve the efficiency of a grid-connected microgrid that combines power, heating, and cooling systems. They suggested a multi-objective model considering responsive loads and electric cars for feeder reconfiguration, capacitor switching, and economical dispatching. The suggested model considers operating expenses, greenhouse gas emissions, the voltage stability index, and active power losses as objective functions. In addition to thermal and electrical energy storage devices, the microgrid based on a combined cooling, heating, and power system was outfitted with non-dispatchable distributed generators (photovoltaic (PV) cells and wind turbines (WTs)). Electric cars, thermal and electrical needs, and the stochastic behavior of non-dispatchable generators were considered for appropriate modeling. The max-geometric mean operator and fuzzy scaling were used in conjunction with a multi-objective hybrid big bang–big crunch algorithm to obtain the best answers. In [
8], the multi-objective sand cat swarm optimization (MSCSO) algorithm was utilized to find a solution for the suggested model. Based on this, the daily stochastic economic scheduling of an electric thermal hydrogen integrated energy system (ETH-IES) was conducted to reduce operational expenses. The main concern of the authors of [
9] was the economic and environmental aspects of microgrid (MG) functioning under different conditions. An analysis is conducted on an AC/DC hybrid MG with solar, diesel generator, lithium battery, and electric car charging stations. A constrained multi-objective optimization problem (CMOP) was constructed considering the operating restrictions of MG. The fuel cost, depreciation expenditure, and emission cost of distributed generators are the optimization goals of the proposed CMOP. A method for converting a multi-objective issue into a single-objective issue was introduced: the fuzzy comprehensive evaluation. Then, the solutions of distributed generator outputs are solved using the comprehensive learning particle swarm optimization (CLPSO). The optimization outcomes in grid-connected and islanded modes demonstrate the efficacy of the suggested models, techniques, and algorithm.
A multi-objective optimization approach utilizing the Normalized Normal Constraint (NNC) was utilized to evaluate two competing objectives: minimizing the operating costs of the Active Distribution System (ADS) and minimizing the power losses in the ADS [
10]. In the interim, variable wind patterns, solar systems, and electric car arrival and departure timings are considered. The suggested model is a multi-objective problem with two stochastic phases run on a modified IEEE 18-bus test system in a General Algebraic Modeling System (GAMS) environment. In [
11], to optimize the environmental and economic performance of an intelligent parking lot (IPL) with electric vehicles (EVs) while utilizing time-of-use (TOU) rates for demand response programs (DRPs), a bi-objective optimization model has been presented. ε-constraint and fuzzy decision-making strategies are applied to tackle this kind of problem, and the outcomes, which show the efficacy and efficiency of the methods used, are displayed for comparison. The IPL linked to the upstream net, renewable and non-renewable resources, and a hydrogen storage system make up the examined example model in that research. The bi-objective issue in question has been modelled using a MIP model, which is then simulated using GAMS. To facilitate the electrification of green transport, the authors in [
12] suggested a multi-objective planning framework for electric vehicle (EV) charging stations in developing power networks. The effects of EV integration on financial and environmental criteria are examined in four examples. The suggested model was designed to integrate the planning models of transmission lines, energy storage systems (ESSs), renewable energy systems, and thyristor-controlled series compensators into the EV-based planning problem to make the construction of EVCSs easier. The second objective, on the other hand, was focused on decreasing the carbon dioxide emissions from fossil fuel-based power units to help the environment. The first objective function seeks to maximize the penetration of EVs by increasing the networks’ capacity to provide charging stations continuously throughout the day. Reducing the initial outlay and ongoing expenses for the installed equipment is the third goal, which aims to satisfy the financial needs. The multi-objective variant of the Gazelle optimization algorithm (MGOA) was used to find a solution for the suggested model, which was expressed as a multi-objective optimization problem. The suggested issue and a set of four benchmark test functions were solved to gauge the MGOA’s effectiveness.
A multi-objective optimization model was developed in [
13] to reduce the gearbox losses, operational expenses, and carbon emissions of many microgrid systems. First, a brand-new technique based on a back propagation neural network enhanced by long short-term memory deep learning was put forth to anticipate the charging loads of EVs. A double-layer solution algorithm was proposed based on the forecast data. At the multiple-microgrid layer, it comprises an adaptive multi-objective evolutionary algorithm based on decomposition and differential evolution. At the single-microgrid layer, it consists of a modified consistency algorithm for rapid economic scheduling. In the end, a case study consisting of four interconnected IEEE microgrids was used to simulate the model system, and the suggested algorithm’s performance was contrasted with that of traditional multi-objective evolutionary algorithms based on decomposition. A methodology for optimization bound by dependability was introduced in [
14] to determine the quantity and dimensions of microgrid (MG) system components. To accomplish this, issue reliability indicators for lost load anticipation and anticipated energy not delivered are introduced. The Monte Carlo sampling technique was used to represent the uncertainties related to load forecasting, modeling of all MG units, and random outage of all units. The suggested paper’s major objective was to determine the ideal MG size that would minimize operating, emission, and MG investment costs. Additionally, under the usage of time-of-use (TOU) rates of demand response programs (DRPs), a bi-objective optimization model has been presented for the best possible environmental performance and economic operation of MGs, including EVs. Fuzzy decision-making techniques and the ε-constraint are applied to alleviate this issue. Long-term planning was tackled as an optimization issue using the Tabu search method.
In [
15], the authors compared the output of vehicle-to-home (V2H) and stationary battery (SB). They devised a multi-objective optimization approach for the household of EV owners utilizing energy expenses, comprising investment and CO
2 emissions, as indices. As a case study, the authors used an imagined average Japanese detached house to assess the environmental and economic effects of solar electricity self-consumption utilizing SB or V2H. The findings indicated that, by 2030, non-commuting EV owners should consider investing in V2H if the cost of a bidirectional charger is one-third that of an affordable SB. In [
16], for regional integrated energy systems (RIESs), a multi-objective optimization that takes electric cars (EVs) and renewable energy uncertainty into account was suggested. The RIES can balance the system’s environmental friendliness and economy. First, an orderly model for charging and discharging EVs with the following driving rules is built. It considers the impact of elements like disorderly access and EV charging/discharging on system functioning. Then, to address the uncertainty of renewable energy generation, a robust optimization model with a polyhedral uncertainty set was built. Additionally, a multi-objective function is constructed to minimize both operation costs and carbon emissions. A carbon emission penalty component is implemented to reduce the multi-objective solution to a single-objective solution. Ultimately, an actual RISE performs the validation.
The authors of [
17] examined how a commercial PV charging station with ten electric car chargers should be commissioned. The charging station may purchase and sell power to the grid as it is linked to the main distribution network. A multi-objective optimization technique has been devised that minimizes the expenses associated with power losses in the distribution grid and the operational costs of the charging station. The owner of the charging station and the distribution system operator have their interests taken into account in the suggested solution. The minimal charge when the car exits the charging station, user comfort restrictions, and grid technical limits were also considered. A single day with a fifteen-minute resolution is the analysis period. In [
18], the authors employed multi-objective optimization to find the best combination of energy and transportation technologies while maximizing the positive effects on the economy and environment.
In contrast to continuous multi-objective linear programming with average cost intervals, the authors showed the extra benefit of using multi-objective mixed integer linear programming (MOMILP) while considering economies of scale. The authors solved MOMILPs precisely using an enhanced version. The effect of policies on the Pareto frontier is evaluated to distinguish between optimum solutions with and without subsidies. The writers distinguished between the need for investments (bounded rationality) and minimizing economic life cycle costs (full rationality). An electrical and transportation-related Belgian corporation serves as an example of the methodology. Transportation technologies include internal combustion engine cars, grid-powered battery electric vehicles (BEVs), and solar-powered BEVs; electricity technologies include solar photovoltaics and the grid. Grid-powered BEVs have a limited ability to reduce greenhouse gas emissions, but they are less expensive to use than solar panels. It was discovered that current policy initiatives appropriately target rational investors who take life cycle costs into account, but private (possibly constrained rational) investors frequently concentrate primarily on needed investments.
To account for uncertainties arising from wind speed, solar irradiance, the conventional load, and PEV load demand, the authors in [
19] proposed a multi-objective optimization methodology for the siting and sizing of solar distributed generations (SDGs), wind distributed generations (WDGs), and capacitor banks (CBs) inside the system of power. The primary goals are the overall cost, greenhouse gas emissions, and the voltage stability index. The associated uncertainties are handled using an unconventional point estimate method (PEM), while a chance-constrained programming technique handles the smooth constraints. Using the greatest entropy approach, the associated probability distribution functions of the output variables are computed. Moreover, Monte Carlo simulation was used for robustness analysis (MCS). The suggested approach was implemented on a standard radial distribution network. The fuzzy satisfactory technique chooses the Pareto front’s optimal trade-off solution.
An interval optimization strategy was suggested by [
20] to represent the unpredictability of upstream grid prices. By changing the uncertainty-based profit function to a deterministic multi-objective problem and treating average and deviation profits as competing objective functions—average profit should reach the maximum, while deviation profit should reach the minimum—the authors presented a novel solution to the problem of electric vehicle aggregator uncertainty. The two-dimensional problem was also solved using the ε-constraint approach to obtain optimum Pareto solutions. Finally, the fuzzy satisfactory strategy was used to select a trade-off solution among Pareto solutions as a target to show the examined technique’s capabilities; it was also contrasted with the deterministic strategy and the proposed interval optimization approach.
Reference [
21] describes the design of an islanded hybrid system (IHS) that includes a diesel generator, solar system, wind turbine (WT), and energy storage systems (ESSs) that are both mobile (electric cars) and stationary (battery). The suggested approach uses two distinct goal functions in a multi-objective optimization to reduce the overall cost of building, maintaining, and operating the sources and ESSs within the IHS and the system’s emission level. A single-objective optimization problem is created for the suggested design using the Pareto optimization methodology based on the ε-constraint method. In [
22], the authors used a multi-objective framework to consider two objectives. A multi-objective mixed binary linear programming was provided to minimize the overall cost of energy consumption and peak load in communal residential structures. This programming considers the scheduling of electric car charging and discharging and battery energy storage systems. Then, the Pareto front solutions of the provided multi-objective model are obtained using the Pascoletti–Serafini scalarization technique. In the end, the suggested model’s performance was examined and documented using model simulations in two distinct scenarios.
Plug-in Electric Vehicles (PEVs) are used as storage units in a multi-objective power dispatching issue that the authors in [
23] defined. The authors minimized three objectives, analyzed three criteria, and framed the energy storage planning as a Mixed-Integer Linear Programming (MILP) problem while adhering to PEV constraints. Two cost-to-variability measures based on the Sharpe Ratio are presented to analyze the energy storage schedules' volatility. Energy storage planning was optimized by adding these extra parameters to minimize the difference between two Sharpe Ratio indices, maximum peak load, PEV battery utilization, total Microgrid (MG) expenses, and maximum peak load. Pareto fronts are examined and discussed about various scenarios for energy storage. The most significant outcome of the study would be that schedules that lower the system's total cost could potentially be less dependable since they increase the maximum peak load and its unpredictability under different circumstances. In [
24], a multi-objective framework was suggested for the day-to-day management of a smart grid (SG) with a high level of sensitive load penetration. To provide highly dependable power for sensitive loads, the Virtual Power Player (VPP) oversees the day-ahead scheduling of energy resources in the smart grid, considering the extensive usage of Distributed Generation (DG) and V2G. The collection of non-dominated solutions is identified by applying a Pareto front technique. To account for the dependability needs of sensitive and vulnerable loads, the mathematical formulation incorporates the maximization of the minimum available reserve in addition to the cost reduction.
By calculating the available capacity of EV aggregators, a preliminary investigation of the multi-objective optimum dispatch of the smart grid was suggested in [
25]. A statistical model was used to determine the maximum possible capacity of EVs by describing their behavior. Subsequently, the multi-objective optimum dispatch was defined together with its constraints. The high-dimensional multi-objective enhancement issue was solved using the multi-objective genetic particle swarm optimizer to find the Pareto front. In [
26], a mixed-integer linear programming (MILP) framework is created to measure flexibility in a sizable business park with limited access to historical time series data. The suggested mathematical model considers renewable energy sources, including solar energy, electric vehicle (EV) charging stations, heat pumps, and centralized energy storage systems. The quantification of flexibility was formulated as a bi-objective optimization problem, which was solved by utilizing the epsilon-constraint approach to approximate the set of Pareto-efficient solutions. The authors’ goal [
27] was to optimize power loss, voltage deviation, and voltage imbalance factor—three significant objective functions—by concurrently allocating EVCSs and smart photovoltaic inverters in distribution networks. A unique hybrid fuzzy Pareto dominance idea with a differential evolution technique was suggested to address such a multi-objective optimization issue. A scenario-based approach was also employed to incorporate the uncertainties of the model that includes loads, PV generation, and EVCS demand. Next, under various case scenarios, the efficacy of the stochastic multi-objective strategy was investigated and confirmed on an imbalanced 37-bus network.
In [
28], a residential microgrid with plug-in hybrid electric cars, PV units, battery energy storage systems, combined cooling, heating and power, and other components was modeled to determine the best scheduling state for each unit while accounting for the uncertainty of distributed energy resources. This was accomplished by modeling the uncertainties of solar irradiance, electrical and heat demand, and electrical market pricing using a scenario-based approach that uses the Normal, Weibull, and Beta probability distribution functions, respectively. Scenario reduction strategies are employed to choose representative situations generated using the scenario tree. The suggested issue was a mixed-integer nonlinear programming problem to minimize emissions and operation costs. The optimal solution on the Pareto front set is identified using a fuzzy approach, and the augmented ε-constraint method was utilized to solve this multi-objective problem. In [
29], considering the time-of-use rates of a demand response program, a multi-objective optimization approach was proposed for the cost-effective operation and environmental performance of intelligent parking lots (IPLs). It was advised to address this problem using the multi-objective grasshopper optimization technique, since such a model is related to several practical bounds. The results show how well the compared methods using fuzzy decision-making strategies worked. To improve this approach and advance searching operators, chaos theory was utilized. Furthermore, the suggested multi-objective approach is a model developed utilizing non-dominated sorting theory, variable detection, fuzzy theory, and strategy selection-based memory to choose the best Pareto among a range of reliable options for handling the abovementioned difficulties.
Optimal nature-inspired metaheuristics algorithms tend to experience premature convergence and, in general, swiftly obtain both the local and almost global optimal states. The No Free Lunch (NFL) theorem [
30] for finding the best algorithm to tackle all optimization problems states that not all algorithms are suited to address all problems. This is because no method is optimal for solving all optimization problems. On the other hand, each of the previously discussed approaches has its unique way of delivering the optimal solution in terms of performance when it comes to resolving and optimizing power issues.
A metaheuristic approach based on simulation was created [
31] to identify the ideal size of a hybrid renewable energy system for residential buildings. The development of a dynamic multi-objective particle swarm optimization method was needed to solve this multi-objective optimization problem. The approach should maximize the buildings’ renewable energy ratio while minimizing the overall net present cost and carbon dioxide emissions for any necessary system modifications. The standard of the Pareto front generated by the proposed technique was assessed using three established performance indicators. A multi-objective optimization model that considers a multi-energy system and minimizes the overall cost and the life cycle emissions of vehicles and buildings was developed [
32]. The model chooses the sorts of vehicle powertrains and the storage and conversion technologies the community utilizes to produce heat and electricity. The Pareto solutions that emerge depend on the shift from internal combustion engine cars to battery electric cars, and to a much lesser extent, plug-in hybrid cars. The heating energy is decarbonized by switching from gas boilers to heat pumps. In [
33], the authors developed a multi-objective hydro–thermal–wind with EV scheduling (MOHTWES) issue by combining large-scale electric vehicles (EVs) with wind power generation. Furthermore, a better multi-objective particle swarm optimization (IMOPSO) approach was suggested to solve the aforementioned issue under several restrictions. The IMOPSO may provide good and well-distributed Pareto optimum solutions in objective space by providing a novel dual-population evolution mechanism and a hierarchical elitism-preserving method based on crowding entropy.
In [
34], the issue of stochastic dynamic pricing and energy management policy for providers of EV charging services was examined. EV charging service providers face numerous uncertainties when energy storage systems and renewable energy integration are present. These include fluctuations in wholesale electricity prices, inherent intermittency in renewable energy generation, and volatility in charging demand. The goal was to provide guidelines to charging service providers to manage electricity and set appropriate charging prices while balancing the competing goals of increasing customer satisfaction, boosting profitability, and lessening their impact on the power grid despite these uncertainties. The authors devised a new metric to assess the impact on the power system without having to solve the full power flow equations. The approach incorporates a safeguard of profit to insulate service providers from extreme financial losses. Two algorithms are used to determine the price and electricity procurement policy: the greedy algorithm (benchmark algorithm) and the stochastic dynamic programming (SDP) algorithm. The multi-objective optimization’s Pareto front was determined. In [
2], the authors suggested a multi-objective planning approach for allocating EVCSs and RESs in the best possible way. In particular, voltage variations, energy losses, and EV owners’ discontent are considered three sub-objectives to be minimized in the proposed RES and EVCS planning framework.
Furthermore, considering the various operating constraints of the grid, RESs, and EVCSs, active power curtailment of RESs is not an option. The suggested framework takes into consideration enhanced control systems for linking RES inverters, as well as grid-to-vehicle (G2V) and V2G schemes, to yield additional benefits. To address this holistic framework with conflicting sub-roles and find the Pareto-optimal solutions, a two-level method was proposed.
In this research, the proposed system comprises a PV–Wind–Battery system combined with EVCS using the vehicle-to-grid (V2G) technique. The thrilling Arithmetic Optimization Algorithm (AOA) has been improved to overcome its drawbacks, such as being trapped in a local search (stagnation in local minima), premature convergence, and neither the addition (A) nor the multiplication (M) operators being obtainable for the exploitation or exploration phases. In addition, in the AOA, the rudimentary mathematical models obtained in both the exploration and exploitation phases (There can never be a perfect balance between exploration and exploitation). Furthermore, most of the methods in the previous literature considered only a single objective during the optimization process for the proposed system (either an economic or technical objective). In this study, a Multi-Objective Improved Arithmetic Optimization Algorithm (MOIAOA) based on the Non-Scale multiple-run Pareto Front concept has been proposed to analyze the optimal sizing design of the proposed system components by calculating the optimal values of the three conflicting objectives, Grid Contribution Factor (GCF), Levelized Cost of Electricity (LCOE), and Energy sold to the grid (). These three constraint objectives are used as renewability, economic, and technical criteria. The RB-EMS is used for controlling and monitoring the power flow of the proposed system. The results are performed to analyze the optimal sizing of the proposed system by using an optimal sizing method based on the MOIAOA Non-Scale multiple-run Pareto Front concept.
The following categories apply to the remaining sections. A description of the proposed system’s modeling components is given in
Section 2. The criteria for the renewability, economic, and technical assessments are given in
Section 3.
Section 4 outlines the suggested methodology for sizing the PV/WT/battery system in conjunction with EVCS utilizing a vehicle-to-grid (V2G) technique in a grid-connected system. In contrast,
Section 5 presents the findings and discussion.
Section 6 wraps up the analysis and suggests next steps.
5. Results and Discussion
In previous sections, the concept and operation of RB-EMS and optimal design have been established for the proposed system. The modeling of the components and power flow control strategy of the proposed system has been presented. This section will present the results obtained from the data collection. The results of the optimal design of the proposed system will be presented.
The proposed system consists of a grid-connected PV-WT battery including EVCS. The EVCS is combined within the proposed system by using V2G technology. In summary, the RB-EMS aims to operate the charging station while keeping the charging cost lower than the average grid electricity price (without economic losses) and reducing the grid burden and system economic losses. In addition, the RB-EMS is embedded in the central controller of the proposed system for real-time decision making without the physical presence of a human operator, so the results of EV charging are derived using the proposed system operated under the control of RB-EMS. The optimal design of the proposed system is provided in this study to show how to meet the load requirement for a government building in the most efficient manner.
The meteorological data of solar insolation (G), temperature (Ta), and wind speed (v) have been used in this research in Al-Najaf Governorate, Iraq. The data obtained are used throughout the simulation process in MATLAB simulations. Data from 1 January 2018 to 31 December 2018 were recorded for one year and collected every ten minutes in a government building. The topographical location of the study region is identified as 31° north latitude and 44° east longitude.
Figure 8,
Figure 9 and
Figure 10 depict the G, Ta, and v plots, respectively.
Data analysis significantly improves our understanding of consumer energy needs from the available Renewable Energy Sources (RESs). This is crucial for handling difficult situations like days without sunlight or wind. The area under study is fortunate to have abundant solar energy and wind throughout the year, with the highest levels observed in July. Most solar radiation, which holds immense potential for generating electricity using photovoltaic (PV) systems, is experienced during summer, followed by spring, autumn and winter. The wind speed is at its maximum in spring, followed by summer, winter, and autumn, offering substantial potential for harnessing wind turbines for electricity generation. Air conditioning units are primarily used during the summer, while consumers predominantly use heaters in winter.
The data of the load demand for the entire year of the building that the study was conducted in show a maximum value of 4.9687 kW and a minimum value of 0.6417 kW every 10 min. A critical stage in optimizing the energy system is accurately estimating the energy demand to be fulfilled to avoid oversizing or under-sizing the system. In this research, the load demand profile for the chosen building is considered for one year with a minimum value of 0.6417 kW and a maximum value of 4.9687 kW. These load data are considered for every ten minutes for the entire year. The load data are graphically presented in
Figure 11. Energy demand can be categorized into domestic loads, including appliances in the selected building. Given the case study area’s two distinct seasonal variations (cold and hot), the energy demand profile data reveal that energy consumption is high during the hot season, in contrast to the cold season.
The plots of the annual PV output power
and wind turbine output power
for the optimal configuration achieved by the proposed system are displayed in
Figure 12 and
Figure 13, respectively. The proposed system is primarily designed to take advantage of the RESs in the location and interchange power via V2G technology between the EVCS and the utility grid. One of the RESs taken into account in the proposed system is PV. The solar irradiance (G) and ambient temperature
are the primary climatological factors that affect the output power produced by the PV.
Figure 12 shows the output power produced by PV in the proposed system. The wind turbine is the second RES regarded in the proposed system and the output power generated from the wind turbine in the proposed system is illustrated in
Figure 13.
5.1. Performance Comparison between the Proposed IAOA and AOA, PSO, ALO
This study used four standard benchmark cases to confirm and verify the original AOA’s stability [
69] and performance. These benchmarks can reasonably approximate the capability of exploitation and exploration, respectively, for the pending algorithm. Numerous experiments were conducted to evaluate the IAOA’s properties, for instance, the differences between IAOA and the original AOA were examined by utilizing several benchmarks, as indicated in
Table 3.
The detailed experimental findings produced by AOA, ALO, PSO, and IAOA on these benchmarks are displayed in
Table 4 concerning best value, worst value, average value and STD (standard deviation) value. This table shows that the IAOA can retrieve the best values by obtaining the minimum values of best value, worst value, average value and STD value. Hence, IAOA outperforms AOA, ALO, and PSO, indicating that algorithm stability can be guaranteed. Furthermore, to further illustrate descript convergence, the evolution curves of each approach on most of the benchmarks in this work are shown in
Figure 14,
Figure 15,
Figure 16 and
Figure 17. These figures show that, on these benchmarks, the proposed IAOA has satisfied quicker convergence than the AOA, PSO, and ALO methods.
Exploiting and exploring individual algorithms are very common in gauging the individual algorithm search capacity for all metaheuristic optimization strategies. The first step in each algorithm is thoroughly exploring the promising areas of the given solution search space. Depending on the optimization technique, optimizers can support this phase by using some stochastic operators to search the given space globally and randomly. The exploitation step, however, is a local search in which the optimizers look near the most promising regions identified thus far in the exploration phase. There is always a challenge in the optimization period to effectively balance these two stages, which can be performed using the controlling parameter. These parameters were carefully selected and tested on the employed standard benchmark test functions in this research.
Fitness–distance balance (FDB) and chaotic map mechanisms have been applied to improve the AOA. The AOA, PSO, and ALO benchmark algorithms are selected to perform the comparative analysis. A comparative analysis between IAOA, AOA, PSO, and ALO has been performed to test the efficiency and reliability of the algorithms, as shown in
Figure 14,
Figure 15,
Figure 16 and
Figure 17. Four popular standard mathematical benchmark functions comprising of the Unimodal and Multimodal functions have been used for comparison implementation.
Figure 14,
Figure 15,
Figure 16 and
Figure 17 display the convergence curve for the IAOA, AOA, PSO, and ALO methods. The convergence curve shows how the algorithm converges to the best solution. So, the convergence curve indicates how fast the fitness value converges towards an optimal solution through iterations. The final value of the fitness value shows the best solution, while the nature/slope of this curve shows how fast the algorithm converges to the final solution. AOA has been improved by enhancing the exploration and exploitation phases. Fitness–distance balance (FDB) mechanisms have enhanced the exploitation phase. At the same time, a chaotic map mechanism has been used to enhance the exploration phase.
IAOA has been compared with the AOA, ALO, and PSO on four benchmark cases, as shown in
Section 5.1. The experimental results, which are average values and evolution curves, are vividly recorded in
Table 4 and
Figure 14,
Figure 15,
Figure 16 and
Figure 17, respectively. These records demonstrate that the efficiency of IAOA was observed according to the enhanced evolutionary convergence in competition with other counterparts. The curves in
Figure 14,
Figure 15,
Figure 16 and
Figure 17 demonstrate an accelerated drift for the proposed IAOA.
5.2. Results of the MIAOA
In this section, an optimization of the proposed system using a Multi-Objective Improved Arithmetic Optimization Algorithm has been implemented. The outcomes of the optimal design method based on RB-EMS-MOIAOA based on the Non-Scale multiple-run Pareto Front concept are shown in this section. The suggested optimization method aims to identify the best layout for the proposed system that would supply building demand at a desired value of LCOE, GCF, and to guarantee that the proposed RB-EMS-MOAOA is reliable and valid when calculating the optimal system size required to meet the required demand of the chosen building.
In this research, the proposed system comprises a grid-connected PV–Wind–Battery system combined with EVCS via using the V2G technique. Multi-Objective Improved Arithmetic Optimization Algorithm (MOIAOA) based on the Non-Scale multiple-run Pareto Front concept has been used to improve the optimal design of the proposed system components. Multi-objective IAOA (MOIAOA) Non-Scale multiple-run Pareto Front concept has been used to calculate the optimal values of the three conflicting objectives, which are Grid Contribution Factor (GCF), Levelized Cost of Electricity (LCOE), and Energy sold to the grid (). This method is classified as a Non-Scale (NS) multiple-run Pareto Front method, which deals with multi-objective optimization problems. Rule-Based Energy Management Strategy (RB-EMS) controls and monitors the proposed system's power flow. Three constraint objectives are used; the technical, economic, and renewability criteria are all weighted, normalized, and combined using a mono-objective function.
Table 5 shows the optimal configurations of the proposed system with sets of weights using the proposed MOIAOA based on the Non-Scale multiple-run Pareto Front concept. For the proposed system,
Table 5 indicates the initializing weights (W1, W2, W3), number of wind turbines, number of PV modules, number of batteries, fitness value, LCOE, GCF,
, and CPU execution time. The range of weight sets is [1, 36] with a step size of 0.1. In
Table 5, the optimal weight set and configurations of the proposed system using the MOIAOA Non-Scale multiple-run Pareto Front concept have been tabulated. The maximum fitness function (f) value recorded is 0.1649 at the set of weights [0.5, 0.3, 0.2]. In contrast, the minimum fitness function (f) value recorded is 0.0611 at the set of weights [0.1, 0.1, 0.8]. The given weight value changes the value of the individual objective. An accurate selection of the effective W1, W2, and W3 weights from the design space is required to find the best trade-off between the technical, economic, and renewability objectives. The trade-off between the defined level of renewability, economic, and technical criteria is required to choose an optimal configuration of the proposed system.
In
Table 5, the first range of weights used in the MATLAB simulation of this work are W1 = 0.1, W2 = 0.8, and W3 = 0.1, and that leads to the results of the number of PV modules being equal to 31, the number of wind turbines equal to 1, number of batteries equal to 138, fitness value equal to 0.0762, LCOE equal to 2.37 ×
USD/kWh, GCF equal to 0.0171 kWh, and
equal to 0.8596 kWh.
Figure 18 presents the distribution of the solutions using the NS multiple-run Pareto Front method, where the aggregation of the three objectives is based on a predetermined set of weights.
Based on
Table 5, the balance can be achieved when optimal weights W1, W2, and W3 are 0.4, 0.2, and 0.4, respectively. The weights of 0.4, 0.2, and 0.4 are optimal. Therefore, at the optimal weights and by comparison with other optimal weights, it can be observed that the value of LCOE is small, and the value of GCF is small, too. At the same time, the value of
is high. The results indicated that by employing the proposed MOIAOA Non-Scale multiple-run Pareto Front concept, the optimal configurations of the proposed system are as follows: number of PV modules equal to 8, number of wind turbines equal to 2, number of batteries equal to 33, fitness value equal to 0.1522, LCOE equal to
USD/kWh, GCF equal to
kWh, and
equal to 0.8409 kWh.
Figure 19 displays the evolution of the mono-objective function (f) (fitness function) based on optimal solutions using MOIAOA based on the Non-Scale multiple-run Pareto Front concept.
Figure 19 depicts the aggregation function’s development for the proposed sizing algorithm at the optimal weights.
Figure 19 demonstrates the development of the evaluation of the aggregation function with the maximum iteration of the proposed method to obtain the optimal size of the components of the proposed system.
Figure 20 exhibits the optimal weight sets based on three objectives using MOIAOA Non-Scale multiple-run Pareto Front concept; this figure presents the optimal configuration based on MOIAOA Non-Scale multiple-run Pareto Front concept, with the three objectives of
, LCOE, and GCF.
The results section shows that the control strategy can effectively schedule the generator at all times and meet the load demand. The simulation results demonstrate the superiority and the rapid convergence performance of the proposed improved (MOIAOA) Non-Scale multiple-run Pareto Front concept algorithm.