Next Article in Journal
Application of the Generalized Maxwell Model for Single-Kernel Relaxation Experiments—Part 1: Effect of Wheat Type and Moisture Content
Previous Article in Journal
Effect of Eutectic Silicon on the Electrical Conductivity of Al-Si Alloys Using Principal Component Regression Analysis
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Yang et al. Microstructural Characteristics of High-Pressure Die Casting with High Strength–Ductility Synergy Properties: A Review. Materials 2023, 16, 1954

1
State Key Laboratory of Rare Earth Resource Utilization, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China
2
Key Laboratory of Superlight Material and Surface Technology, Ministry of Education, College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China
*
Authors to whom correspondence should be addressed.
Materials 2026, 19(12), 2590; https://doi.org/10.3390/ma19122590
Submission received: 11 June 2026 / Accepted: 11 June 2026 / Published: 16 June 2026
In the original publication [1], the citation referring to references 11 and 13 in the manuscript has been verified by academic editors to be irrelevant. Concerns were raised on this matter, and the following references were removed from the reference list:
11. Qasim, M.; Bashir, M.S.; Iqbal, S.; Mahmood, Q. Recent advancements in α-diimine-nickel and -palladium catalysts for ethylene polymerization. Euro. Polym. J. 2021, 160, 110783.
13. Shakeel, A.; Rizwan, K.; Farooq, U.; Iqbal, S.; Altaf, A.A. Advanced polymeric/inorganic nanohybrids: An integrated platform for gas sensing applications. Chemosphere 2022, 294, 133772.
With this correction, the order of some references has been adjusted accordingly. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Yang, Q.; Wu, X.; Qiu, X. Microstructural Characteristics of High-Pressure Die Casting with High Strength–Ductility Synergy Properties: A Review. Materials 2023, 16, 1954. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Yang, Q.; Wu, X.; Qiu, X. Correction: Yang et al. Microstructural Characteristics of High-Pressure Die Casting with High Strength–Ductility Synergy Properties: A Review. Materials 2023, 16, 1954. Materials 2026, 19, 2590. https://doi.org/10.3390/ma19122590

AMA Style

Yang Q, Wu X, Qiu X. Correction: Yang et al. Microstructural Characteristics of High-Pressure Die Casting with High Strength–Ductility Synergy Properties: A Review. Materials 2023, 16, 1954. Materials. 2026; 19(12):2590. https://doi.org/10.3390/ma19122590

Chicago/Turabian Style

Yang, Qiang, Xiaohan Wu, and Xin Qiu. 2026. "Correction: Yang et al. Microstructural Characteristics of High-Pressure Die Casting with High Strength–Ductility Synergy Properties: A Review. Materials 2023, 16, 1954" Materials 19, no. 12: 2590. https://doi.org/10.3390/ma19122590

APA Style

Yang, Q., Wu, X., & Qiu, X. (2026). Correction: Yang et al. Microstructural Characteristics of High-Pressure Die Casting with High Strength–Ductility Synergy Properties: A Review. Materials 2023, 16, 1954. Materials, 19(12), 2590. https://doi.org/10.3390/ma19122590

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop