Next Article in Journal
Characterizing the Effect of Freeze–Thaw Cycling on Pore Structure of Asphalt Concrete Mixtures Using X-ray CT Scanning
Next Article in Special Issue
Crash Performance of Inward-Inverting Composite Tubes Filled with Foam: Experimentation and Simulation
Previous Article in Journal
Investigation of the Fabrication of Diamond/SiC Composites Using α-Si3N4/Si Infiltration
Previous Article in Special Issue
Increasing the Compressive Strength of Helicoidal Laminates after Low-Velocity Impact upon Mixing with 0° Orientation Plies and Its Analysis
 
 

Order Article Reprints

Journal: Materials, 2023
Volume: 16
Number: 6253

Article: Filament-Reinforced 3D Printing of Clay
Authors: by Julian Jauk, Lukas Gosch, Hana Vašatko, Markus Königsberger, Johannes Schlusche and Milena Stavric
Link: https://www.mdpi.com/1996-1944/16/18/6253

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop