Next Article in Journal
Study on Preparation and Properties of Glass Fibre Fabric Reinforced Polyphenylene Sulphide Composites
Next Article in Special Issue
Microstructure and Recrystallization Behavior of Heating Rate-Controlled Electrolytic Capacitor Aluminum Foil under Cold Forming and Annealing
Previous Article in Journal
Investigation of the Effect of ECAP Parameters on Hardness, Tensile Properties, Impact Toughness, and Electrical Conductivity of Pure Cu through Machine Learning Predictive Models
Previous Article in Special Issue
Corrosion Behavior of Cold-Rolled and Solution-Treated Fe36Mn20Ni20Cr16Al5Si3 HEA in Different Acidic Solutions
 
 

Order Article Reprints

Journal: Materials, 2022
Volume: 15
Number: 9034

Article: The Optimization of Mechanical Alloying Conditions of Powder for the Preparation of a Fe-10Al-4Cr-4Y2O3 ODS Nanocomposite
Authors: by Jiří Svoboda, Štepán Gamanov, Denisa Bártková, Natália Luptáková, Petr Bořil, Milan Jarý, Bohuslav Mašek, Jakub Holzer and Petr Dymáček
Link: https://www.mdpi.com/1996-1944/15/24/9034

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop