Next Article in Journal
Effect of Isothermal Holding at 750 °C and 900 °C on Microstructure and Properties of Cast Duplex Stainless Steel Containing 24% Cr-5% Ni-2.5% Mo-2.5% Cu
Previous Article in Journal
Study on the Influence of Delamination Damage on the Processing Quality of Composite Laminates
Previous Article in Special Issue
Fabry-Perot Interference Fiber Acoustic Wave Sensor Based on Laser Welding All-Silica Glass
 
 

Order Article Reprints

Journal: Materials, 2022
Volume: 15
Number: 8571

Article: Effect of an Anaerobic Fermentation Process on 3D-Printed PLA Materials of a Biogas-Generating Reactor
Authors: by Adrian Cioabla, Virgil-Florin Duma, Corina Mnerie, Ralph-Alexandru Erdelyi, George Mihai Dobre, Adrian Bradu and Adrian Podoleanu
Link: https://www.mdpi.com/1996-1944/15/23/8571

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop