Next Article in Journal
Autonomous Robotic Feature-Based Freeform Fabrication Approach
Next Article in Special Issue
Structure and Properties of Copper Pyrophosphate by First-Principle Calculations
Previous Article in Journal
Periodic Expansion and Contraction Phenomena in a Pendant Droplet Associated with Marangoni Effect
Previous Article in Special Issue
Template-Assisted Iron Nanowire Formation at Different Electrolyte Temperatures
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 15
Issue 1
10.3390/ma15010245
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Microwave-Assisted Hydrothermal Synthesis of Zinc-Aluminum Spinel ZnAl2O4

by
Tomasz Strachowski
1,*,
Ewa Grzanka
2,
Jan Mizeracki
2,
Adrian Chlanda
1,
Magdalena Baran
1,
Marcin Małek
3 and
Marlena Niedziałek
3
1
Research Group of Graphene and Composites, Lukasiewicz Research Network–Institute of Microelectronics and Photonics IMiF, Al. Lotnikow 32/46, 02-668 Warsaw, Poland
2
Institute of High Pressure Physics PAS “Unipress”, Sokolowska 29/37, 01-142 Warsaw, Poland
3
Faculty of Civil Engineering and Geology, Military University of Technology, ul. Gen. Sylwestra Kaliskiego 2, 00-908 Warsaw, Poland
*
Author to whom correspondence should be addressed.
Materials 2022, 15(1), 245; https://doi.org/10.3390/ma15010245
Submission received: 3 December 2021 / Revised: 28 December 2021 / Accepted: 28 December 2021 / Published: 29 December 2021
(This article belongs to the Special Issue Nanoparticles and Nanotechnology: From the Synthesis to Application)
Browse Figures
Review Reports Versions Notes

Abstract

:
The drawback of the hydrothermal technique is driven by the fact that it is a time-consuming operation, which greatly impedes its commercial application. To overcome this issue, conventional hydrothermal synthesis can be improved by the implementation of microwaves, which should result in enhanced process kinetics and, at the same time, pure-phase and homogeneous products. In this study, nanometric zinc aluminate (ZnAl2O4) with a spinel structure was obtained by a hydrothermal method using microwave reactor. The average ZnAl2O4 crystallite grain size was calculated from the broadening of XRD lines. In addition, BET analysis was performed to further characterize the as-synthesized particles. The synthesized materials were also subjected to microscopic SEM and TEM observations. Based on the obtained results, we concluded that the grain sizes were in the range of 6–8 nm. The surface areas measured for the samples from the microwave reactor were 215 and 278 m2 g−1.

1. Introduction

Spinels are a group of compounds with the general formula AB2O4, where A is a divalent metal (Zn, Mg, Fe or Mn) and B is a trivalent metal (Al, Fe, Cr or Mn). The spinel network cell is regular. It can be described as consisting of a series of F-type networks (embedded corners and wall centers). A regular elementary cell contains 32 oxygen anions and 24 cations: 8 (A)-type cations occupy tetrahedral gaps, and 16 (B)-type cations are in octahedral gaps. In regular spinels (which include ZnAl2O4), the tetrahedral positions are occupied by 8 A(+III) ions, and the octahedral positions are occupied by 16 B(+III) ions [1,2,3,4,5].
Zinc-aluminum spinel can be obtained by various methods, such as sol–gel [6,7,8,9,10,11,12], hydrothermal methods [13,14,15,16,17,18,19,20], co-precipitation [21,22,23,24,25,26], combustion methods [27,28,29,30] and solvothermal synthesis [31,32,33]. Implementation of these methods resulted in splines with a size distribution ranging from 15 to 100 nm. It is worth noting that hydrothermal synthesis is the simplest method to obtain spinels with nanometric grain size. However, this method usually needs a long process time and low temperature. Conventional hydrothermal synthesis can be improved by the implementation of microwaves, which results in a faster increase in temperature and process kinetics and the generation of pure-phase and homogeneous products.
Oxide spinels comprise a broad group of compounds with complex structures that are of great technological importance. This group includes zinc-aluminum spinel, which is characterized by many desirable properties, including: high mechanical resistivity, high thermal stability and low sintering temperature. Zinc-aluminum spinel is widely used in chemical and electronics industries and in catalytic reactions such as cracking, dehydration, hydrogenation and dehydrogenation. This applies mainly to spinel doped with Fe(+III) ions [34,35,36,37,38,39,40]. The zinc-aluminum spinel is transparent to light at wavelengths above 320 nm and has therefore found application in optoelectronics (energy gap 3.8 eV) [41,42,43,44,45,46,47,48,49,50]. In addition, transparent spinels without defects are used in precision mechanics (e.g., for bearing production) and as gemstones [51,52,53,54,55]. This spinel has also found applications in the manufacture of nanotubes, nanowires and thin films. Zinc-aluminum spinel doped with ions of various chemical elements, such as Co3+, Er3+, Eu3+, Yb3+, Tb3+ and Mn3+, also has interesting properties. Spinel doped with these elements exhibits excellent luminescent properties [56,57,58,59,60,61,62,63,64,65].
This manuscript contains a detailed description of the synthesis and characterization of selected vital properties of as-obtained materials. Although one can find literature reports describing scientific efforts aimed at fabricating similar materials, it is worth underlining that it is hard to obtain zinc-aluminum spinel grains characterized by small sizes (in a range of single nanometers). There are several literature reports of obtaining zinc-aluminum spinel with sizes measured in single nanometers [7,19].
In addition to zinc-aluminum spinel, other compounds in the spinel group, such as ZnGa2O4 [66], MgCr2O4 [67] and SrAl2O4 [68], are of great interest.
The authors consider the most interesting achievement of this research to be the preparation of zinc-aluminum spinel with a small grain size and large specific surface area. In the literature, one can find zinc-aluminum spinels with much larger grains [6,11,12,13,18].

2. Materials and Methods

2.1. Materials

Zn(NO3)2*6H2O and Al(NO3)3*9H2O were used for the hydrothermal synthesis of zinc-aluminum spinel. A 2 M aqueous solution of KOH was used as the substance for the precipitation of zinc and aluminum hydroxides. When preparing the solution of the respective salts, the proportion was maintained so that the molar ratio of Al:Zn was 2:1.
Appropriate amounts of zinc and aluminum salts were weighed in a 500 mL beaker, and then 150 mL of distilled water was added. Mixing was carried out with a magnetic stirrer at room temperature for 1 h. A 2 M KOH aqueous solution was gradually poured into the mixed solution until pH = 12 was reached. Figure 1 shows a schematic step-by-step description of the production of zinc-aluminum spinel.
The obtained zinc-aluminum hydroxide suspension was poured into reaction vessels and placed in a microwave reactor. The microwave reactor is a laboratory instrument designed for hydrothermal syntheses in a microwave field. Microwave energy is drawn into the head from the magnetron through a waveguide in which a short antenna is immersed. The whole system is controlled by means of a central processing unit (CPU) controller communicating with a personal computer (PC). The computer program allows adjusting power thresholds and pressure limits, along with temperature and pressure registration during the process [69].
The experiment in the microwave reactor was as follows. The prepared solution was poured into a Teflon reaction vessel with a capacity of 110 mL. The vessel was then closed with a Teflon lid and placed inside the stainless-steel head. The final step was to close the head and start the process.
The appropriate process parameters must be set in order to obtain good-quality resulting material. In the case of the presented study, the process was conducted for 15, 30 or 60 min. After completion of the processes, the product was filtered under pressure through filters and washed repeatedly with distilled water. The purified material was then placed in a vacuum dryer (70 °C/24 h).

2.2. Methods

A Siemens D-5000 X-ray diffractometer (Siemens-Bruker Corporation, Germany) was used to analyze the obtained synthesis products. It enables the determination of the phase composition, recognition of crystallographic lattice and identification of the coordinates of atoms in the elementary cell (by the Rietveld method).
Density was determined by a gas pycnometer (AccuPyc 1330 helium pycnometer, Micromeritics, Norcross, GA, USA). The specific surface area was measured using the BET adsorption method with a Micromeritics device. Microstructure studies of nanopowders were performed using scanning microscopy with a Zeiss LEO1530 (Carl Zeiss, Germany) equipped with a Zeiss Gemini column.

3. Results and Discussion

X-ray Tomography of Ceramic Preforms

Table 1 presents the results of tests on zinc-aluminum spinel obtained in the microwave reactor. The overriding conclusion from these results is that the grain size was in the same range (6–7 nm), and it was independent of the synthesis time. The process temperature was approximately 200 °C. The density and specific surface areas were maintained at similar levels.
XRD analysis revealed that the microwave reactor yielded a product that contained a ZnO phase in addition to the ZnAl2O4 spinel phase. In order to obtain a pure spinel phase, we decided to perform an experiment using the same process time while increasing the process pressure (50, 60 and 70 atm). Figure 2 shows the results of XRD analysis for samples obtained at different pressures for 30 min. It can be observed that as the pressure increased, the ZnO phase disappeared, and the pure ZnAl2O4 phase remained.
Table 2 shows the results of the analysis of zinc-aluminum spinel samples that were synthesized at elevated pressure. It was observed that as the pressure and time process increased, the ZnO phase disappeared, and the pure ZnAl2O4 phase remained.
Figure 3 shows the dependence of the specific surface area (BET) as a function of process time and pressure. It can be observed that the highest value was achieved for the sample obtained in the 30 min process at a pressure of 50 atm. As the pressure and process time increased, the value of the specific surface area decreased. This is particularly evident for samples obtained at 60 min of process time. This was significantly influenced by lowering the process temperature, increasing the pressure and using microwaves, which also shortened the process time. Based on the literature review [6,7,8,12,13,14,15,20,21], it can be noted that previous studies carried out the synthesis of ZnAl2O4 in the temperature range from 600 to 900 °C. At those temperatures, a product with a small specific surface area and, consequently, a large grain size was obtained.
Figure 4 shows the dependence of density on pressure and process time. It can be observed that with an increase in these parameters (up to 30 min), the density increased, while after this time, it decreased.
After measuring the density and specific surface area with the BET method, it was found that 30 min was the optimal process time, as both parameters (density and specific surface area) were characterized by the highest values.
Figure 5 shows scanning microscope (SEM) and transmission microscope photographs (Figure 6) for samples obtained at the optimum process time of 30 min. One can notice the powder crystallites in the form of spherical grains. Observation by transmission microscopy confirmed the actual nanometric grain size obtained in this study.
Based on the obtained results, it can be concluded that in a single synthesis, zinc-aluminum spinel was obtained with a grain size in the range of 6–8 nm and a density in the range of 3.41–3.51 g/cm3.

4. Conclusions

Hydrothermal synthesis of zinc-aluminum spinel using a microwave reactor was carried out.
We concluded that the syntheses performedin the microwave reactor resulted in zinc-aluminum spinel with an average grain size in the range of 6–7 nm. At a lower pressure (39 atm), a ZnO phase appeared in addition to the spinel phase, which in this case, was unwanted. In order to obtain a pure spinel phase (without ZnO doping), the process pressure was increased (50, 60 and 70 atm).
The obtained products were characterized by a high specific surface area in the range of 220–280 m2/g. The density measured on a helium pycnometer was in the range of 3.4–3.7 g/cm3. The aforementioned material properties were plotted against time, which enabled the designation of the optimum process time: 30 min.
Analysis of the morphology using a scanning microscope showed that the reaction product agglomerated as beads (Figure 5). These structures were composed of fine crystallites that were attracted to each other in the reaction slurry or during post-synthesis washing. The morphology of the powders observed with a transmission microscope (TEM) enclosed fine grains (below 10 nm). We concluded that the higher the process pressure, the smaller the grains. The finest grains were observed for powder obtained at a pressure of 70 atm and a time of 30 min.
Having all of this in mind, we want to underline that the synthesis of zinc-aluminum spinel using a hydrothermal method using a microwave reactor is advantageous because it results in a final product with:
  • High density;
  • Phase homogeneity;
  • Nanometric grain size.

Author Contributions

Conceptualization, T.S.; methodology, T.S., M.B., E.G., J.M. and M.N.; validation, A.C. and M.M.; investigation, E.G., J.M., M.N. and M.B.; resources, writing—original draft preparation, T.S.; writing—review and editing, A.C. and M.M. All authors have read and agreed to the published version of the manuscript.

Funding

Institute of High Pressure Physics of the Polish Academy of Sciences (statutory project). Faculty of Civil Engineering and Geodesy of the Military University of Technology as part of project UGB No. 22-870.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

All individuals included in this section have agreed to be confirmed.

Acknowledgments

The research was financed by the own funds of the Institute of High Pressure Physics of the Polish Academy of Sciences. This work was financially supported by the Faculty of Civil Engineering and Geodesy of the Military University of Technology as part of project UGB No. 22-870.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Bosi, F.; Biagioni, C.; Pasero, M. Nomenclature and classification of the spinel supergroup. Eur. J. Mineral. 2019, 31, 183–192. [Google Scholar] [CrossRef] [Green Version]
  2. O’Neill, H.S.C.; Navrotsky, A. Simple spinels: Crystallographic parameters, cation radii, lattice energies, and cation distribution. Am. Mineral. 1983, 68, 181–194. [Google Scholar]
  3. Hill, R.J.; Craig, J.R.; Gibbs, G.V. Systematics of the Spinel Structure Type. Phys. Chem. Miner. 1979, 4, 317. [Google Scholar] [CrossRef]
  4. Sommer, S.; Drath Bøjesen, E.; Lock, N.; Kasai, H.; Skibsted, J.; Nishibori, E.; Iversen, B.B. Probing the validity of the spinel inversion model: A combined SPXRD, PDF, EXAFS and NMR study of ZnAl2O4. Dalton Trans. 2020, 49, 13449. [Google Scholar] [CrossRef]
  5. Seko, A.; Oba, F.; Tanaka, I. Classification of spinel structures based on first-principles cluster expansion analysis. Phys. Rev. B 2010, 81, 054114. [Google Scholar] [CrossRef] [Green Version]
  6. Da Silva, A.A.; de Souza Goncalves, A.; Davolos, M.R. Characterization of nanosized ZnAl2O4 spinel synthesized by the sol–gel method. J. Sol-Gel Sci. Technol. 2009, 49, 101–105. [Google Scholar] [CrossRef]
  7. Sharma, R.K.; Ghosen, R. Synthesis and characterization of nanocrystalline zinc aluminate spinel powder by sol–gel method. Ceram. Int. 2014, 40, 3209–3214. [Google Scholar] [CrossRef]
  8. Davar, F.; Salavati-Niasari, M. Synthesis and characterization of spinel-type zinc aluminate nanoparticles by a modified sol–gel method using new precursor. J. Alloys Compd. 2011, 509, 2487–2492. [Google Scholar] [CrossRef]
  9. Zulfakar, M.S.; Abdullah, H.; Jalal, W.N.W.; Zainuddin, Z.; Shaari, S. Study of Nanocrystalline ZnAl2O4 and ZnFe2O4 with SiO2 on Structural and Optical Properties Synthesized by Sol-Gel Method. Adv. Mater. Res. 2015, 1119, 96–100. [Google Scholar] [CrossRef]
  10. Valenzuela, M.A.; Bosch, E.; Aguilar-Rios, G.; Montoya, A.; Schifter, I. Comparison Between Sol-Gel, Coprecipitation and Wet Mixing Synthesis of ZnAl2O4. J. Sol-Gel Sci. Technol. 1997, 8, 107–110. [Google Scholar] [CrossRef]
  11. Wei, X.; Chen, D. Synthesis and characterization of nanosized zinc aluminate spinel by sol–gel technique. Mater. Lett. 2006, 60, 823–827. [Google Scholar] [CrossRef]
  12. Belyaev, A.V.; Lelet, M.I.; Kirillova, N.I.; Khamaletdinova, N.M.; Boldin, M.S.; Murashov, A.A.; Balabanov, S.S. Sol-gel synthesis and characterization of ZnAl2O4 powders for transparent ceramics. Ceram. Int. 2019, 45, 4835–4839. [Google Scholar] [CrossRef]
  13. Confalonieri, G.; Rotiroti, N.; Bernasconi, A.; Dapiaggi, M. Structural Study of Nano-Sized Gahnite (ZnAl2O4): From the Average to the Local Scale. Nanomaterials 2020, 10, 824. [Google Scholar] [CrossRef]
  14. Mathur, S.; Veith, M.; Haas, M.; Shen, H.; Lecerf, N.; Huch, V.; Hufner, S.; Haberkorn, R.; Beck, H.P.; Jilavi, M. Single-Source Sol–Gel Synthesis of Nanocrystalline ZnAl2O4: Structural and Optical Properties. J. Am. Ceram. Soc. 2001, 84, 1921–1928. [Google Scholar] [CrossRef]
  15. De Macedo, H.P.; de Araújo Medeiros, R.L.B.; de Medeiros, A.L.; de Oliveira, A.A.S.; de Figueredo, G.P.; de Freitas Melo, M.A.; de Araújo Melo, D.M. Characterization of ZnAl2O4 Spinel Obtained by Hydrothermal and Microwave Assisted Combustion Method: A Comparative Study. Mater. Res. 2017, 20 (Suppl. S2), 29–33. [Google Scholar] [CrossRef] [Green Version]
  16. Miron, I.; Enache, C.; Vasile, M.; Grozescu, I. Optical properties of ZnAl2O4 nanomaterials obtained by the hydrothermal method. Phys. Scr. 2012, T149, 014064. [Google Scholar] [CrossRef]
  17. Sibera, D.; Strachowski, T.; Lojkowski, W.; Narkiewicz, U.; Chudoba, T.; Jędrzejewski, R.; Majcher, A.; Presz, A. Nano-ZnAl2O4—Hydrothermal MW Assisted Synthesis In A Stop-Flow Reactor And Characterization. Maint. Probl. 2010, 4, 91–102. [Google Scholar]
  18. Zawadzki, M. Synthesis of nanosized and microporous zinc aluminate spinel by microwave assisted hydrothermal method (microwave–hydrothermal synthesis of ZnAl2O4). Solid State Sci. 2006, 8, 14–18. [Google Scholar] [CrossRef]
  19. Chen, X.Y.; Ma, C.; Zhang, Z.J.; Wang, B.N. Ultrafine gahnite (ZnAl2O4) nanocrystals: Hydrothermal synthesis and photoluminescent properties. Mater. Sci. Eng. B 2008, 151, 224–230. [Google Scholar] [CrossRef]
  20. Chen, Z.; Shi, E.; Zheng, Y.; Li, W.; Wu, N.; Zhong, W. Synthesis of mono-dispersed ZnAl2O4 powders under hydrothermal conditions. Mater. Lett. 2002, 56, 601–605. [Google Scholar] [CrossRef]
  21. Battistona, S.; Rigoa, C.; da Cruz Severoa, E.; Mazuttia, M.A.; Kuhna, R.C.; Gündelb, A.; Foletto, E.L. Synthesis of Zinc Aluminate (ZnAl2O4) Spinel and its Application as Photocatalyst. Mater. Res. 2014, 17, 734–738. [Google Scholar] [CrossRef]
  22. Marconato Stringhini, F.; Foletto, E.L.; Sallet, D.; Assumpção Bertuol, D.; Chiavone-Filho, O.; Oller do Nascimento, C.A. Synthesis of porous zinc aluminate spinel (ZnAl2O4) by metal-chitosan complexation method. J. Alloys Compd. 2014, 588, 305–309. [Google Scholar] [CrossRef]
  23. Farhadi, S.; Panahandehjoo, S. Spinel-type zinc aluminate (ZnAl2O4) nanoparticles prepared by the co-precipitation method: A novel, green and recyclable heterogeneous catalyst for the acetylation of amines, alcohols and phenols under solvent-free conditions. Appl. Catal. A Gen. 2010, 382, 293–302. [Google Scholar] [CrossRef]
  24. Foletto, E.L.; Battiston, S.; Simoes, J.M.; Moro Bassaco, M.; Severo Fagundes Pereira, L.; Marlon de Moraes Flores, E.; Irineu Muller, E. Synthesis of ZnAl2O4 nanoparticles by different routes and the effect of its pore size on the photocatalytic process. Microporous Mesoporous Mater. 2012, 163, 29–33. [Google Scholar] [CrossRef]
  25. Ge, D.-L.; Fan, Y.-J.; Qi, C.-L.; Sun, Z.-X. Facile synthesis of highly thermostable mesoporous ZnAl2O4 with adjustable pore size. J. Mater. Chem. A 2013, 1, 1651. [Google Scholar] [CrossRef]
  26. Ananda, G.T.; Kennedya, L.J.; Vijayac, J.J.; Kaviyarasana, K.; Sukumar, M. Structural, optical and magnetic characterization of Zn1−xNixAl2O4 (0 ≤ x ≤ 5) spinel nanostructures synthesized by microwave combustion technique. Ceram. Int. 2015, 41, 603–615. [Google Scholar] [CrossRef]
  27. Mirbagheri, S.A.; Masoudpanah, S.M.; Alamolhod, S. Structural and optical properties of ZnAl2O4 powders synthesized by solution combustion method: Effects of mixture of fuels. Optik 2020, 204, 164170. [Google Scholar] [CrossRef]
  28. Mohanty, P.; Mohapatro, S.; Mahapatra, R.; Mishra, D.K. Low cost synthesis route of spinel ZnAl2O4. Mater. Today Proc. 2021, 35, 130–132. [Google Scholar] [CrossRef]
  29. Ianos, R.; Lazau, R.; Lazau, I.; Pacurariu, C. Chemical oxidation of residual carbon from ZnAl2O4 powders prepared by combustion synthesis. J. Eur. Ceram. Soc. 2012, 32, 1605–1611. [Google Scholar] [CrossRef]
  30. Han, M.; Wang, Z.; Xu, Y.; Wu, R.; Jiao, S.; Chen, Y.; Feng, S. Physical properties of MgAl2O4, CoAl2O4, NiAl2O4, CuAl2O4, and ZnAl2O4 spinels synthesized by a solution combustion method. Mater. Chem. Phys. 2018, 215, 251–258. [Google Scholar] [CrossRef]
  31. Sirikajorn, T.; Mekasuwandumrong, O.; Praserthdam, P.; Goodwin, J.G., Jr.; Panpranot, J. Effect of Support Crystallite Size on Catalytic Activity and Deactivation of Nanocrystalline ZnAl2O4-Supported Pd Catalysts in Liquid-Phase Hydrogenation. Catal. Lett. 2008, 126, 313–318. [Google Scholar] [CrossRef]
  32. Song, X.; Zheng, S.; Zhang, J.; Li, W.; Chen, Q.; Cao, B. Synthesis of monodispersed ZnAl2O4 nanoparticles and their tribology properties as lubricant additives. Mater. Res. Bull. 2012, 47, 4305–4310. [Google Scholar] [CrossRef]
  33. Zawadzki, M. Pd and ZnAl2O4 nanoparticles prepared by microwave-solvothermal method as catalyst precursors. J. Alloys Compd. 2007, 439, 312–320. [Google Scholar] [CrossRef]
  34. Ghorbani-Choghamarani, A.; Mohammadi, M.; Shiri, L.; Taherinia, Z. Synthesis and characterization of spinel FeAl2O4 (hercynite) magnetic nanoparticles and their application in multicomponent reactions. Res. Chem. Intermed. 2019, 45, 5705–5723. [Google Scholar] [CrossRef]
  35. Enhessari, M. FeAl2O4 Nanopowders; Structural Analysis and Band Gap Energy. High Temp. Mater. Proc. 2017, 36, 789–793. [Google Scholar] [CrossRef]
  36. Azam, M.; Nairan, A.; Riaz, S.; Naseem, S. FeAl2O4 thin films prepared by sol-gel—structural and magnetic properties. Mater. Today Proc. 2015, 2, 5150–5154. [Google Scholar] [CrossRef]
  37. Jastrzębska, I.; Szczerba, J.; Błachowski, A.; Stoch, P. Structure and microstructure evolution of hercynite spinel (Fe2+Al2O4) after annealing treatment. Eur. J. Mineral. 2017, 29, 63–72. [Google Scholar] [CrossRef]
  38. Daghetta, M.A.A.; Dapiaggi, M.; Pellegrino, L.; Pastore, B.; Pagliari, L.; Mazzocchia, C.V. Synthesis of Hercynite at very Mild Condition. Chem. Eng. Trans. 2015, 43, 1741–1746. [Google Scholar] [CrossRef]
  39. Nestola, F.; Periotto, B.; Anzolini, C.; Andreozzi, G.B.; Woodland, A.B.; Lenaz, D.; Alvaro, M.; Princivalle, F. Equation of state of hercynite, FeAl2O4, and high-pressure systematics of Mg-Fe-Cr-Al spinels. Mineral. Mag. 2015, 79, 285–294. [Google Scholar] [CrossRef]
  40. Castillo Rodriguez, G.A.; Garcıa Guillen, G.; Mendivil Palma, M.I.; Das Roy, T.K.; Guzman Hernandez, A.M. Synthesis and Characterization of Hercynite Nanoparticles by Pulsed Laser Ablation in Liquid Technique. Int. J. Appl. Ceram. Technol. 2014, 12, E34–E43. [Google Scholar] [CrossRef]
  41. Hou, Q.; Meng, F.; Sun, J. Electrical and optical properties of Al-doped ZnO and ZnAl2O4 films prepared by atomic layer deposition. Nanoscale Res. Lett. 2013, 8, 144. [Google Scholar] [CrossRef] [Green Version]
  42. Kim, B.-N.; Hiraga, K.; Jeong, A.; Hu, C.; Suzuki, T.S.; Yun, J.-D.; Sakka, Y. Transparent ZnAl2O4 ceramics fabricated by spark plasma sintering. J. Ceram. Soc. Jpn. 2014, 122, 784–787. [Google Scholar] [CrossRef] [Green Version]
  43. Guo, Y.; Lu, Y.; Liu, C.; Wang, J.; Han, J.; Ruan, J. Effect of ZnAl2O4 crystallization on ion-exchange properties in aluminosilicate glass. J. Alloys Compd. 2021, 851, 156891. [Google Scholar] [CrossRef]
  44. Salih, E.Y.; Mohd Sabri, M.F.; Sulaiman, K.; Hussein, M.Z.; Said, S.M.; Usop, R.; Mohd Salleh, M.F.; Bashir Ali Bashir, M. Thermal, structural, textural and optical properties of ZnO/ZnAl2O4 mixed metal oxide-based Zn/Al layered double hydroxide. Mater. Res. Express 2018, 5, 116202. [Google Scholar] [CrossRef]
  45. Iaiche, S.; Djelloul, A. ZnO/ZnAl2O4 Nanocomposite Films Studied by X-ray Diffraction, FTIR, and X-ray Photoelectron Spectroscopy. J. Spectrosc. 2015, 2015, 836859. [Google Scholar] [CrossRef] [Green Version]
  46. Salih, E.Y.; Mohd Sabri, M.F.; Hussein, M.Z.; Sulaiman, K.; Mohd Said, S.; Saifullah, B.; Bashir Ali Bashir, M. Structural, optical and electrical properties of ZnO/ZnAl2O4 nanocomposites prepared via thermal reduction approach. J. Mater. Sci. 2018, 53, 581–590. [Google Scholar] [CrossRef]
  47. Chandramohan, R.; Dhanasekaran, V.; Arumugam, R.; Sundaram, K.; Thirumalai, J.; Mahalingam, T. Physical Properties Evaluation Of Annealed ZnAl2O4 Alloy Thin Films. Dig. J. Nanomater. Biostructures 2012, 7, 1315–1325. [Google Scholar]
  48. Kumar, K.; Ramamoorthy, K.; Koinkar, P.M.; Chandramohan, R.; Sankaranarayan, K. A novel in situ synthesis and growth of ZnAl2O4 thin films. J. Cryst. Growth 2006, 289, 405–407. [Google Scholar] [CrossRef]
  49. Somraksa, W.; Suwanboon, S.; Amornpitoksuk, P.; Randorn, C. Physical and Photocatalytic Properties of CeO2/ZnO/ZnAl2O4 Ternary Nanocomposite Prepared by Co-precipitation Method. Mater. Res. 2020, 23, e20190627. [Google Scholar] [CrossRef]
  50. Iaiche, S.; Boukaous, C.; Alamarguy, D.; Djelloul, A.; Hamana, D. Effect of Solution Concentration on ZnO/ZnAl2O4 Nanocomposite Thin Films Formation Deposited by Ultrasonic Spray Pyrolysis on Glass and Si(111) Substrates. J. Nano Res. 2020, 63, 10–30. [Google Scholar] [CrossRef]
  51. Gorghinian, A.; Mottana, A.; Rossi, A.; Oltean, F.M.; Esposito, A.; Marcelli, A. Investigating the colour of spinel: 1. Red gem-quality spinels (“balas”) from Ratnapura (Sri Lanka). Rend. Lincei 2013, 24, 127–140. [Google Scholar] [CrossRef]
  52. Phyo, M.M.; Bieler, E.; Franz, L.; Balmer, W.; Krzemnicki, M.S. Spinel from Mogok, Myanmar—A Detailed Inclusion Study by Raman Microspectroscopy and Scanning Electron Microscopy. J. Gemmol. 2019, 36, 418–435. [Google Scholar] [CrossRef]
  53. Huong, L.T.-T.; Häger, T.; Hofmeister, W.; Hauzenberger, C.; Schwarz, D.; Van Long, P.; Wehrmeister, U.; Khoi, N.N.; Nhung, N.T. Gemstones from Vietnam: An Update. Gems Gemol. 2012, 48, 158–176. [Google Scholar] [CrossRef] [Green Version]
  54. Kruzslicz, A.B.; Nasdala, L.; Wildner, M.; Škoda, R.; Redhammer, G.J.; Hauzenberger, C.; Wanthanachaisaeng, B. Black Spinel—A Gem Material from Bo Phloi, Thailand. J. Gemmol. 2020, 37, 66–79. [Google Scholar] [CrossRef]
  55. Htoo, K.M.; Khin, T.; Htoon, S. Study on Physical Properties and Chemical Composition of Some Myanmar Gems. J. Myanmar Acad. Arts Sci. 2004, 2, 173–178. [Google Scholar]
  56. Azer, C.; Ramadan, A.R.; Ghaly, G.; Ragai, J. Preparation and Characterization of Cobalt Aluminate Spinels CoAl2O4 Doped with Magnesium Oxide. Adsorpt. Sci. Technol. 2012, 30, 399–407. [Google Scholar] [CrossRef]
  57. Zhang, D.; Wang, C.; Liu, Y.; Shi, Q.; Wang, W.; Zha, Y. Green and red photoluminescence from ZnAl2O4:Mn phosphors prepared by sol―gel method. J. Lumin. 2012, 132, 1529–1531. [Google Scholar] [CrossRef]
  58. Bakhmetyev, V.V.; Lebedev, L.A.; Malygin, V.V.; Podsypanina, N.S.; Sychov, M.M.; Belyaev, V.V. Effect of Composition and Synthesis Route on Structure and Luminescence of NaBaPO4:Eu2+ and ZnAl2O4:Eu3+. JJAP Conf. Proc. 2016, 4, 011104. [Google Scholar] [CrossRef] [Green Version]
  59. Tshabalala, K.G.; Nagpure, I.M.; Swart, H.C.; Ntwaeaborwa, O.M.; Cho, S.H.; Park, J.-K. Enhanced green emission from UV down-converting Ce3+–Tb3+ co-activated ZnAl2O4 phosphor. J. Vac. Sci. Technol. B 2012, 30, 031401. [Google Scholar] [CrossRef]
  60. Kumar, M.; Natarajan, V.; Godbole, S.V. Synthesis, characterization, photoluminescence and thermally stimulated luminescence investigations of orange red-emitting Sm3+-doped ZnAl2O4 phosphor. Bull. Mater. Sci. 2014, 37, 1205–1214. [Google Scholar] [CrossRef]
  61. Kumaria, P.; Dwivedi, Y.; Bahadur, A. Analysis of bright red-orange emitting Mn2+:ZnAl2O4 spinel nanophosphor. Optik 2018, 154, 126–132. [Google Scholar] [CrossRef]
  62. Strek, W.; Deren, P.; Bednarkiewicz, A.; Zawadzki, M.; Wrzyszcz, J. Emission properties of nanostructured Eu3+ doped zinc aluminate spinels. J. Alloys Compd. 2000, 300–301, 456–458. [Google Scholar] [CrossRef]
  63. Belyaev, A.; Basyrova, L.; Sysoev, V.; Lelet, M.; Balabanov, S.; Kalganov, V.; Mikhailovski, V.; Baranov, M.; Stepanidenko, E.; Vitkin, V.; et al. Microstructure, doping and optical properties of Co2+:ZnAl2O4 transparent ceramics for saturable absorbers: Effect of the ZnF2 sintering additive. J. Alloys Compd. 2020, 829, 154514. [Google Scholar] [CrossRef]
  64. Kumar, M.; Mohapatra, M. A case study of energy transfermechanism from uraniumto europium in ZnAl2O4 spinel host by photoluminescence spectroscopy. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 2016, 159, 42–47. [Google Scholar] [CrossRef]
  65. Sumathi, S.; Kavipriya, A. Structural, optical and photocatalytic activity of cerium doped zinc aluminate. Solid State Sci. 2017, 65, 52e60. [Google Scholar] [CrossRef]
  66. Luchechko, A.; Zhydachevskyy, Y.; Ubizskii, S.; Kravets, O.; Popov, A.I.; Rogulis, U.; Elsts, E.; Bulur, E.; Suchocki, A. Afterglow, TL and OSL Properties of Mn2+-doped ZnGa2O4 Phosphor. Sci. Rep. 2019, 9, 9544. [Google Scholar] [CrossRef]
  67. Mykhailovych, V.; Kanak, A.; Cojocaru, Ş.; Chitoiu-Arsene, E.-D.; Palamaru, M.N.; Iordan, A.-R.; Korovyanko, O.; Diaconu, A.; Ciobanu, V.G.; Caruntu, G.; et al. Structural, Optical, and Catalytic Properties of MgCr2O4 Spinel-Type Nanostructures Synthesized by Sol–Gel Auto-Combustion Method. Catalysts 2021, 11, 1476. [Google Scholar] [CrossRef]
  68. Zhai, B.-G.; Huang, Y.-M. Green Afterglow of Undoped SrAl2O4. Nanomaterials 2021, 11, 2331. [Google Scholar] [CrossRef]
  69. Web Site of Ertec Poland. Available online: www.ertec.pl (accessed on 20 July 2019).
Materials 15 00245 g001 550
Figure 1. Scheme of the production of zinc-aluminum spinel.
Figure 1. Scheme of the production of zinc-aluminum spinel.
Materials 15 00245 g001
Materials 15 00245 g002 550
Figure 2. XRD analysis of zinc-aluminum spinel under different pressures.
Figure 2. XRD analysis of zinc-aluminum spinel under different pressures.
Materials 15 00245 g002
Materials 15 00245 g003 550
Figure 3. Dependence of the specific surface area as a function of process time and pressure.
Figure 3. Dependence of the specific surface area as a function of process time and pressure.
Materials 15 00245 g003
Materials 15 00245 g004 550
Figure 4. Dependence of density on pressure and process time.
Figure 4. Dependence of density on pressure and process time.
Materials 15 00245 g004
Materials 15 00245 g005a 550Materials 15 00245 g005b 550
Figure 5. SEM pictures of samples obtained at the optimum process time of 30 min.
Figure 5. SEM pictures of samples obtained at the optimum process time of 30 min.
Materials 15 00245 g005aMaterials 15 00245 g005b
Materials 15 00245 g006 550
Figure 6. TEM pictures of samples obtained at the optimum process time of 30 min.
Figure 6. TEM pictures of samples obtained at the optimum process time of 30 min.
Materials 15 00245 g006
Table
Table 1. Results of zinc-aluminum spinel analysis.
Table 1. Results of zinc-aluminum spinel analysis.
Time (min)153060
Pressure (atm)393939
Density (g/cm3)3.723.533.68
BET (m2/g)260266262
Grain size (nm)6–76–76–7
PhasesZnAl2O4 + ZnOZnAl2O4 + ZnOZnAl2O4 + ZnO
Table
Table 2. Results of the analysis of zinc-aluminum spinel samples after synthesis.
Table 2. Results of the analysis of zinc-aluminum spinel samples after synthesis.
SampleDensity
(g/cm3)		BET
(m2/g)		Grain Size (nm)Phases
15 min/50 atm3.412717ZnAl2O4
15 min/60 atm3.412547ZnAl2O4
15 min/70 atm3.422427ZnAl2O4
30 min/50 atm3.532786ZnAl2O4
30 min/60 atm3.532558ZnAl2O4
30 min/70 atm3.512606ZnAl2O4
60 min/50 atm3.482666ZnAl2O4
60 min/60 atm3.512606ZnAl2O4
60 min/70 atm3.482237ZnAl2O4
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Strachowski, T.; Grzanka, E.; Mizeracki, J.; Chlanda, A.; Baran, M.; Małek, M.; Niedziałek, M. Microwave-Assisted Hydrothermal Synthesis of Zinc-Aluminum Spinel ZnAl2O4. Materials 2022, 15, 245. https://doi.org/10.3390/ma15010245

AMA Style

Strachowski T, Grzanka E, Mizeracki J, Chlanda A, Baran M, Małek M, Niedziałek M. Microwave-Assisted Hydrothermal Synthesis of Zinc-Aluminum Spinel ZnAl2O4. Materials. 2022; 15(1):245. https://doi.org/10.3390/ma15010245

Chicago/Turabian Style

Strachowski, Tomasz, Ewa Grzanka, Jan Mizeracki, Adrian Chlanda, Magdalena Baran, Marcin Małek, and Marlena Niedziałek. 2022. "Microwave-Assisted Hydrothermal Synthesis of Zinc-Aluminum Spinel ZnAl2O4" Materials 15, no. 1: 245. https://doi.org/10.3390/ma15010245

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop