Skip to Content
You are currently on the new version of our website. Access the old version .
MaterialsMaterials
  • Review
  • Open Access

22 June 2021

38 Pages

Impact of Design Parameters on the Ratio of Compressive to Split Tensile Strength of Self-Compacting Concrete with Recycled Aggregate

,
,
,
,
and
1
Department of Mining Technology, Topography and Structures, Campus de Vegazana s/n, University of León, 24071 León, Spain
2
Department of Civil Engineering, Coimbatore Institute of Technology, Coimbatore 641014, Tamil Nadu, India
3
Department of Applied Physics, Campus de Vegazana s/n, University of León, 24071 León, Spain
*
Authors to whom correspondence should be addressed.
This article belongs to the Section Construction and Building Materials

Abstract

Most concrete studies are concentrated on mechanical properties especially strength properties either directly or indirectly (fresh and durability properties). Hence, the ratio of split tensile strength to compressive strength plays a vital role in defining the concrete properties. In this review, the impact of design parameters on the strength ratio of various grades of Self-Compacting Concrete (SCC) with recycled aggregate is assessed. The design parameters considered for the study are Water to Cement (W/C) ratio, Water to Binder (W/B) ratio, Total Aggregates to Cement (TA/C) ratio, Fine Aggregate to Coarse Aggregate (FA/CA) ratio, Water to Solid (W/S) ratio in percentage, superplasticizer (SP) content (kg/cu.m), replacement percentage of recycled coarse aggregates (RCA), replacement percentage of recycled fine aggregates (RFA), fresh density and loading area of the specimen. It is observed that the strength ratio of SCC with recycled aggregates is affected by design parameters.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.