You are currently viewing a new version of our website. To view the old version click .
Materials
  • Correction
  • Open Access

2 June 2021

Correction: Ghanei et al. Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies. Materials 2017, 10, 1215

,
,
,
,
and
1
Department of Civil Engineering, Mahmoudabad Branch, Islamic Azad University, Mahmoudabad 46456-55111, Iran
2
Department of Civil Engineering, Malayer University, Malayer 65719-95863, Iran
3
Centre for Future Materials (CFM), School of Civil Engineering and Surveying, University of Southern Queensland, Toowoomba, QLD 4350, Australia
4
School of Architecture and Built Environment, The University of Newcastle, Callaghan, NSW 2308, Australia
The authors regret that Figures 6 and 11b in [1] were printed incorrectly. Therefore, the authors wish to make the following corrections to Figure 6 and Figure 11b. Since the analysis was conducted based on the following images, the correction does not affect the results and conclusions.
Figure 6. SEM images of: (a) CO sample; and (b) MK30 sample.
Figure 11. SEM images of: (a) PP; and (b) PP-MK10NC3.

Reference

  1. Ghanei, A.; Jafari, F.; Khotbehsara, M.M.; Mohseni, E.; Tang, W.; Cui, H. Effect of Nano-CuO on Engineering and Microstructure Properties of Fibre-Reinforced Mortars Incorporating Metakaolin: Experimental and Numerical Studies. Materials 2017, 10, 1215. [Google Scholar] [CrossRef]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.