Next Article in Journal
Effect of Phenolic Resin on the Rheological and Morphological Characteristics of Styrene-Butadiene Rubber-Modified Asphalt
Next Article in Special Issue
Assessment of AlN/Mg–8Al Composites Reinforced with In Situ and/or Ex Situ AlN Particles
Previous Article in Journal
Polycrystal Simulation of Texture-Induced Grain Coarsening during Severe Plastic Deformation
Previous Article in Special Issue
On the Elemental Impact Factor, a Method to Determine an Alloy’s Compositional Influences upon Phase Stability and Metallurgical Material Properties
 
 

Order Article Reprints

Journal: Materials, 2020
Volume: 13
Number: 5835

Article: Analysis and Modeling of the Micro-Cutting Process of Ti-6Al-4V Titanium Alloy with Single Abrasive Grain
Authors: by Łukasz Rypina, Dariusz Lipiński, Błażej Bałasz, Wojciech Kacalak and Tomasz Szatkiewicz
Link: https://www.mdpi.com/1996-1944/13/24/5835

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop