Next Article in Journal
The Influence of Oxygen Concentration during MAX Phases (Ti3AlC2) Preparation on the α-Al2O3 Microparticles Content and Specific Surface Area of Multilayered MXenes (Ti3C2Tx)
Next Article in Special Issue
Nanomechanical and Material Properties of Fluorine-Doped Tin Oxide Thin Films Prepared by Ultrasonic Spray Pyrolysis: Effects of F-Doping
Previous Article in Journal
Development of an Intra-Layer Adaptive Toolpath Generation Control Procedure in the Laser Metal Wire Deposition Process
Previous Article in Special Issue
A Coupled EBSD/TEM Analysis of the Microstructure Evolution of a Gradient Nanostructured Ferritic/Martensitic Steel Subjected to Surface Mechanical Attrition Treatment
 
 
Article

Article Versions Notes

Materials 2019, 12(3), 351; https://doi.org/10.3390/ma12030351
Action Date Notes Link
article xml file uploaded 23 January 2019 12:18 CET Original file -
article pdf uploaded. 23 January 2019 12:18 CET Version of Record https://www.mdpi.com/1996-1944/12/3/351/pdf-vor
article xml file uploaded 28 January 2019 07:13 CET Update -
article xml uploaded. 28 January 2019 07:13 CET Update https://www.mdpi.com/1996-1944/12/3/351/xml
article pdf uploaded. 28 January 2019 07:13 CET Updated version of record https://www.mdpi.com/1996-1944/12/3/351/pdf
article html file updated 28 January 2019 07:15 CET Original file -
article html file updated 20 February 2019 02:43 CET Update -
article html file updated 3 April 2019 08:27 CEST Update -
article html file updated 12 April 2019 22:14 CEST Update -
article html file updated 27 April 2019 02:17 CEST Update -
article html file updated 13 October 2019 20:18 CEST Update -
article html file updated 11 February 2020 11:06 CET Update -
article html file updated 18 July 2022 01:15 CEST Update https://www.mdpi.com/1996-1944/12/3/351/html
Back to TopTop