Next Article in Journal
Influence of Different Grades of CBN Inserts on Cutting Force and Surface Roughness of AISI H13 Die Tool Steel during Hard Turning Operation
Previous Article in Journal
Comparing the Through-Thickness Gradient of the Deformed and Recrystallized Microstructure in Tantalum with Unidirectional and Clock Rolling
 
 
Article

Article Versions Notes

Materials 2019, 12(1), 176; https://doi.org/10.3390/ma12010176
Action Date Notes Link
article xml file uploaded 7 January 2019 12:02 CET Original file -
article xml uploaded. 7 January 2019 12:02 CET Update https://www.mdpi.com/1996-1944/12/1/176/xml
article pdf uploaded. 7 January 2019 12:02 CET Version of Record https://www.mdpi.com/1996-1944/12/1/176/pdf
article html file updated 7 January 2019 12:05 CET Original file -
article html file updated 16 January 2019 09:05 CET Update -
article html file updated 2 April 2019 23:10 CEST Update -
article html file updated 13 April 2019 06:28 CEST Update -
article html file updated 27 April 2019 10:30 CEST Update -
article html file updated 12 October 2019 23:30 CEST Update -
article html file updated 11 February 2020 07:09 CET Update -
article html file updated 17 July 2022 21:41 CEST Update https://www.mdpi.com/1996-1944/12/1/176/html
Back to TopTop