Next Article in Journal
Effects of Pore Size on Fatigue Deformation Mechanism of Open-Cell Copper Foam at Low Stress Amplitude
Next Article in Special Issue
Using the Machine Vision Method to Develop an On-machine Insert Condition Monitoring System for Computer Numerical Control Turning Machine Tools
Previous Article in Journal
Phase Formation during Solidification of Mg-Nd-Zn Alloys: An In Situ Synchrotron Radiation Diffraction Study
Previous Article in Special Issue
Experimental Parametric Model for Adhesion Wear Measurements in the Dry Turning of an AA2024 Alloy
 
 

Order Article Reprints

Journal: Materials, 2018
Volume: 11
Number: 1638

Article: Comparison of Flank Super Abrasive Machining vs. Flank Milling on Inconel® 718 Surfaces
Authors: by Haizea González, Octavio Pereira, Asier Fernández-Valdivielso, L. Norberto López de Lacalle and Amaia Calleja
Link: https://www.mdpi.com/1996-1944/11/9/1638

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop