Next Article in Journal
Effects of Pore Size on Fatigue Deformation Mechanism of Open-Cell Copper Foam at Low Stress Amplitude
Next Article in Special Issue
Using the Machine Vision Method to Develop an On-machine Insert Condition Monitoring System for Computer Numerical Control Turning Machine Tools
Previous Article in Journal
Phase Formation during Solidification of Mg-Nd-Zn Alloys: An In Situ Synchrotron Radiation Diffraction Study
Previous Article in Special Issue
Experimental Parametric Model for Adhesion Wear Measurements in the Dry Turning of an AA2024 Alloy
 
 
Article

Article Versions Notes

Materials 2018, 11(9), 1638; https://doi.org/10.3390/ma11091638
Action Date Notes Link
article xml file uploaded 6 September 2018 14:14 CEST Original file -
article xml uploaded. 6 September 2018 14:14 CEST Update https://www.mdpi.com/1996-1944/11/9/1638/xml
article pdf uploaded. 6 September 2018 14:14 CEST Version of Record https://www.mdpi.com/1996-1944/11/9/1638/pdf
article html file updated 6 September 2018 14:15 CEST Original file -
article html file updated 28 September 2018 12:23 CEST Update -
article html file updated 31 March 2019 16:01 CEST Update -
article html file updated 15 April 2019 04:09 CEST Update -
article html file updated 29 April 2019 08:24 CEST Update -
article html file updated 7 October 2019 13:23 CEST Update -
article html file updated 10 February 2020 09:36 CET Update -
article html file updated 20 July 2022 16:36 CEST Update https://www.mdpi.com/1996-1944/11/9/1638/html
Back to TopTop