Next Article in Journal
Fretting Fatigue Analysis of Additively Manufactured Blade Root Made of Intermetallic Ti-48Al-2Cr-2Nb Alloy at High Temperature
Next Article in Special Issue
Impact-Sliding Tribology Behavior of TC17 Alloy Treated by Laser Shock Peening
Previous Article in Journal
Characterization of Graphite Oxide and Reduced Graphene Oxide Obtained from Different Graphite Precursors and Oxidized by Different Methods Using Raman Spectroscopy
Previous Article in Special Issue
The Application of Globular Water-Atomized Iron Powders for Additive Manufacturing by a LENS Technique
 
 

Order Article Reprints

Journal: Materials, 2018
Volume: 11
Number: 1051

Article: Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion
Authors: by Marina Cabrini, Flaviana Calignano, Paolo Fino, Sergio Lorenzi, Massimo Lorusso, Diego Manfredi, Cristian Testa and Tommaso Pastore
Link: https://www.mdpi.com/1996-1944/11/7/1051

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop