The authors wish to make the following corrections to this paper [1]: Figure 7 on page 3573 should be changed from:
to correct the version as follows:
Figure 7.
Measured maximum singular values for output sensitivity functions at a standstill.
Figure 7.
Measured maximum singular values for output sensitivity functions at a standstill.
The authors would like to apologize for any inconvenience caused to the readers by these changes.
Reference
- Jastrzebski, R.P.; Smirnov, A.; Mystkowski, A.; Pyrhönen, O. Cascaded position-flux controller for an AMB system operating at zero bias. Energies 2014, 7, 3561–3575. [Google Scholar] [CrossRef]
© 2015 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/4.0/).