Next Article in Journal
Assessment of Transmission Reliability Margin: Existing Methods and Challenges and Future Prospects
Previous Article in Journal
Numerical Investigation of Sheet-Gyroid Structure Modifications for Mixing Application in Renewable Energy Technologies
 
 
Communication
Peer-Review Record

Analytical Diagnostic and Control System of Energy and Mechanical Efficiency of Electric Drives

Energies 2025, 18(9), 2266; https://doi.org/10.3390/en18092266
by Nikolay Korolev
Reviewer 1:
Reviewer 2:
Energies 2025, 18(9), 2266; https://doi.org/10.3390/en18092266
Submission received: 31 March 2025 / Revised: 23 April 2025 / Accepted: 25 April 2025 / Published: 29 April 2025

Round 1

Reviewer 1 Report

Comments and Suggestions for Authors

1- In the abstract, revise grammar for fluency, e.g.,

“...supported by experiments.” → “...which are supported by experimental validation.”

“...we carried out the experiments.” → “...used in our experiments.”
2- For Table 1, some variables need clearer explanations or unit indications.
3- Figure 13: Labeling of modes (idle, loaded) is appreciated. Consider including these in figure captions explicitly.
4- You might Compare your system’s performance (detection accuracy, sensitivity) with other methods.
and 
Discuss limitations (e.g., sampling rate, real-time constraints, generalization to other drive types).
5- Consider briefly stating potential for AI integration or predictive maintenance.
6-Scalability Discussion: Could the proposed system be scaled for multi-drive monitoring in industrial settings?
7- Integration with AI: Since you mention machine learning as future work, outline possible integration points or algorithms (e.g., anomaly detection, pattern recognition).
8- Numerous grammar and syntax issues affect readability. A language revision by a fluent English speaker is recommended.




Author Response

Dear reviewer,

We are sincere thankful to you for your valuable and helpful comments. We tried to have taken into account all comments and now we are submitting the revised version of our article. The authors have revised the article taking care of all the suggested comments by reviewers, checked and improved the article English language.

Thank You.

With best regards.

Dr. Nikolay Korolev.

Author Response File: Author Response.docx

Reviewer 2 Report

Comments and Suggestions for Authors

Dear Author,

Thank you for your important and interesting research on analytical diagnostic and control system of electric drives. I agree with your presentation format and delta description of the evidence base of the research. I will have just a couple of additional questions, which I hope will help your Readers understand the essence of the research in more detail:


1. Introduction. When you demonstrate possible causes of wear and tear and types of reduction in the efficiency of the electric drive, could you support these points with parameter values? In what range does the deterioration of certain values ​​or the percentage of failure of a certain parameter typically occur?
2. Is it possible to reform Fig. 4 into a table for a clearer presentation of the data?
3. Did you control the temperature and humidity of the environment during the tests? Does this have any effect?

I wish you success in all future research!

Kind regards,

Reviewer

Author Response

Dear reviewer,

We are sincere thankful to you for your valuable and helpful comments. We tried to have taken into account all comments and now we are submitting the revised version of our article. The authors have revised the article taking care of all the suggested comments by reviewers, checked and improved the article English language.

Thank You.

With best regards.

Dr. Nikolay Korolev.

Author Response File: Author Response.docx

Back to TopTop