Exploitation and Maintenance of Biomethane-Powered Truck and Bus Fleets to Assure Safety and Mitigation of Greenhouse Gas Emissions

Motor vehicles in transport, as one of the important sectors of the economy, emit a significant amount of carbon dioxide and other products in the form of exhaust gases, which are harmful to human health. The emission of exhaust gases from motor vehicles is limited by appropriate regulations in accordance with environmental goals, such as the Paris Climate Agreement. Reduced emissions and fuel (energy) consumption is mainly achieved by applying modern technologies for the production of internal combustion engines; transitioning to cleaner fuels, such as renewable natural gas or biomethane; and using alternative propulsion systems. Biomethane stored in a liquid state in on-board reservoirs has advantages in truck transport, ships, and air traffic. The reason for this is due to the higher concentration of energy per unit volume of the reservoirs and the lower storage pressure and thus higher safety compared to the high-pressure storage option (compressed biomethane). The presented research is related to a proposition regarding the design of drive systems of city buses using biomethane as fuel in cases when fuel is stored on-board the vehicle as gas in a compressed aggregate state. In this study, the results of a calculation method regarding the roof-supporting structure of an experimental bus with gas reservoirs under higher pressure are discussed as well. This study also presents the possibility of reducing harmful emissions if biomethane is used instead of conventional fuels as a transitional solution to electric-powered vehicles. For the sake of comparison, it is suggested that the engaged energy and the amount of produced carbon dioxide emissions within the drive systems of different fuels are calculated according to the recommendations of the standard EN16258:2012.