Monitoring Lead Concentration in the Surrounding Environmental Components of a Lead Battery Company: Plants, Air and Effluents—Case Study, Kenya

Lead (Pb) pollution from smelters and lead–acid battery has become a serious problem worldwide owing to its toxic nature as a heavy metal. Stricter regulations and monitoring strategies have been formulated, legislated and implemented in various parts of the world on heavy metal usage. Developed countries such as the USA and in Europe largely operate within the set standards, however, developing countries such as Kenya, Nigeria and India, with limited regulatory capacity, resources and sufficient data, face poor Pb waste management and exposure of the population to health risks. This study assessed the pollution concerns from Associated Battery Manufacturers (East Africa) Limited (ABM), located in the Nairobi Industrial Area in Kenya. Samples of air, extracts from plants (leaves) and factory wastewaters were taken from different operations units, prepared and analysed with Atomic Absorption Spectrometry (AAS). Pb traces remained fairly controlled with averages of 1.24 ± 0.42 parts per million (ppm), 1.21 ± 0.02 ppm and 0.29 ± 0.01 ppm in the air, plant extracts and effluents, respectively. The conducted research shows that the obtained lead concentrations in the air, wastewater and surrounding plants exceeded the recommended standards, and are potentially harmful not only to workers, but also to the surrounding villages.